Tweet
I am in the market for a 1996 Cutlass Coupe. Hopefully one with a bad motor. Then i want to find a 3400 and build it to be dropped in. Here is the build plan for the motor.
New 3500 heads with comp springs for the cam and stainless valves.
3500 LIM and UIM porting and polishing
3500 fpr swap bracket
65mm polished tb
3500 tb adapter
I will also be using 3.4DOHC pistons to bump up the compression. Now to buy a car.
New 3500 heads with comp springs for the cam and stainless valves.
3500 LIM and UIM porting and polishing
3500 fpr swap bracket
65mm polished tb
3500 tb adapter
I will also be using 3.4DOHC pistons to bump up the compression. Now to buy a car.
