Tweet
Hey 60ºfans!
My plans for a 2.8/3400 fell through in favor of a 3.4/3500, and I bring forth the parts I will not be using.
I am not asking much for these parts, as a lot of work went into the 3400 heads port job. They were cleaned, ported, polished, and flowmatched, and I bought them from another member on the forum. Then, I sent them off to the machine shop to get milled flat as they were .008 and .006 warped, so .010 was removed from each one, and the valves were lapped.
I am asking $300 for the heads, and as I will be using a 3500 top end, you can have the 3400 intake manifolds too. The intakes are stock/unported. All mating surfaces have been precision sanded.
The top end from an L32 1995 3.4 ironhead camaro is up for grabs too.
If you want to stay as an ironhead, this is the best combo to buy as it is sfi/mpfi.
You get the heads, lower intake, upper intake (complete with TB and sensors), fuel rail with injectors and injector harness, egr stuff, and pushrods.
I asking $300. The stuff looks dirty because it is. The car sat for two years due to body damage, but started after a new battery and ran good before I disassembled it.
Shipping is responsibility of the buyer and will be charged separately.
I am willing to part this stuff out and take offers as I am in dire need of cash.
Paypal, direct transfers, and money orders are accepted.
PM or reply if you have questions!
Here are some pix of said items.
My plans for a 2.8/3400 fell through in favor of a 3.4/3500, and I bring forth the parts I will not be using.
I am not asking much for these parts, as a lot of work went into the 3400 heads port job. They were cleaned, ported, polished, and flowmatched, and I bought them from another member on the forum. Then, I sent them off to the machine shop to get milled flat as they were .008 and .006 warped, so .010 was removed from each one, and the valves were lapped.
I am asking $300 for the heads, and as I will be using a 3500 top end, you can have the 3400 intake manifolds too. The intakes are stock/unported. All mating surfaces have been precision sanded.
The top end from an L32 1995 3.4 ironhead camaro is up for grabs too.
If you want to stay as an ironhead, this is the best combo to buy as it is sfi/mpfi.
You get the heads, lower intake, upper intake (complete with TB and sensors), fuel rail with injectors and injector harness, egr stuff, and pushrods.
I asking $300. The stuff looks dirty because it is. The car sat for two years due to body damage, but started after a new battery and ran good before I disassembled it.
Shipping is responsibility of the buyer and will be charged separately.
I am willing to part this stuff out and take offers as I am in dire need of cash.
Paypal, direct transfers, and money orders are accepted.
PM or reply if you have questions!
Here are some pix of said items.
Comment