'96 DOHC Intake setup

[Emc209i]

Upper intake, Lower, Intake tube, Throttle body, all sensors (IAC, TPS, etc, etc..).

All that is missing is; the fuel rail, egr valve, bolts, and you'll need gaskets. If I recall, another member on the front page is selling everything but the intake itself, maybe he can help you guys out.

I can't get this on my Fiero because the intake arm hits the dogbone brace.

$100 + shipping. This is a big part, and so shipping is pretty variable depending on where you are. Let me know where you're at and I can get a shipping estimate. Most likely not more than $20.00.



-------------------------------

_______________1988 Pontiac Fiero: Formula/GT - 3.4 DOHC - 5 Speed_______________

[Guest]

I just sent a lower and upper intake to cali from florida for a 3400. $40. Figure about $1 per lb.

[Emc209i]

I know it won't be that much! How did you spend $40 shipping a uim Shaun?! 0.o

I've sent things of equivalent weight across the US for much less.

[Emc209i]

Bump

[94GPGTP]

will my 95 fuel rail work with it do you know?? Also will the 95 EGR work with it?

OK i just read the write up on the sawp... is this all you have?? do you have the egr tube? bolts? egr? coolant pipe? support bracket?

[Emc209i]

The earlier fuel rail will not work, which is one of the reasons I'm not going to try and make this work on my car. I spent hours polishing my older style rail and have become quite attached to it. The older EGR will need an adapter plate to bolt to the intake arm. I'd recommend just picking up a newer style part. I was planing on blocking off the EGR completely, which is why I don't have the valve. Consequently, I don't have the tube either.

Like I said in the first post, you'll need to find bolts. You can easily make the older coolant pipe work by tapping the intake inlet and running a short length of heater hose to the older coolant pipe.

The support bracket is extra weight- completely unnecessary.

Here is the thread I mentioned earlier: http://60degreev6.com/forum/showthre...t=40376&page=3
It appears he has the hardware you'd need.

[Identity Crisis]

Shipping to Canada please give a quote:

Edmonton Alberta
T0A2H0

[HayesPerformance]

hmmmm, So Shawn needs a spare................................


LOL

[Emc209i]

Being that you'll require international shipping, shipping via FedEx ground would be $51.00. I could ship to Alaska cheaper being that it is a US providence.

I normally don't like shipping across boarders, but I'm willing to send it if you'd be up for the shipping charge.