Tweet
A new page entry has been added:
[drupal=138]OBD2 Inspection/Maintenance Procedure[/drupal]
[drupal=138]OBD2 Inspection/Maintenance Procedure[/drupal]
Inspection/Maintenance (I/M) Complete System Set Procedure
Description
The purpose of the I/M Complete System Set Procedure is to satisfy the enable criteria necessary to execute all of the I/M readiness diagnostics, and complete the trips for those particular diagnostics. When all diagnostic tests are completed, the I/M System Status indicators are set to YES. Perform this test when more than one or all of the I/M System Status indicators are set to NO.
Conditions for Running
Cold Start
<ul> The barometric pressure is more than 65 kPa.</p>
Description
The purpose of the I/M Complete System Set Procedure is to satisfy the enable criteria necessary to execute all of the I/M readiness diagnostics, and complete the trips for those particular diagnostics. When all diagnostic tests are completed, the I/M System Status indicators are set to YES. Perform this test when more than one or all of the I/M System Status indicators are set to NO.
Conditions for Running
Cold Start
<ul> The barometric pressure is more than 65 kPa.</p>