Tweet
about to order my pushrods for my hybrid but idk what all info i need
my cam specs are
Lift: Intake - 454
Exhaust -480
Rocker Arm Ratio 1.5
i am using the stock 3400 1.6 rockers so i forget how to do the math
but i think i need open and closed pressure
i'm using the ls6 springs so what would that be do you think?>
do my measurements sound close? these are the crane lifters as well
i measured at least 10 times
my heads haven't been milled and i am running stock felpro gasket how ever thick that is
exhaust
6.342
6.344
6.363
6.334
6.343
INtake-they were all the same basically off by a few thousands
6.002
6.004
sounds about right?
so can someone tell me what all i need to tell pushrods.net so i can get the hybrid out next week
my cam specs are
Lift: Intake - 454
Exhaust -480
Rocker Arm Ratio 1.5
i am using the stock 3400 1.6 rockers so i forget how to do the math
but i think i need open and closed pressure
i'm using the ls6 springs so what would that be do you think?>
do my measurements sound close? these are the crane lifters as well
i measured at least 10 times
my heads haven't been milled and i am running stock felpro gasket how ever thick that is
exhaust
6.342
6.344
6.363
6.334
6.343
INtake-they were all the same basically off by a few thousands
6.002
6.004
sounds about right?
so can someone tell me what all i need to tell pushrods.net so i can get the hybrid out next week