Tweet
what are people runnign for cams in the non roller motors and how do you like them. how is idle and power increase.
-
-
Mechanical roller, custom from Crower. 254/246@.05" .62/.60" lift, 114 separation. idle is fine (At 1000 rpm), big power increase over my mechanical flat tappet cam. -
what kind of rollers are you using are they just for these engines or from something eles. i would love to put a hydrolic roller in my motor but didn't know anyone made roller for it. i'm thik of a mechanical cam too thoughComment
-
I got the roller mechanical lifters from Crane, but from what some people are saying, they no longer offer them. They didn't have any when I ordered mine, but they still made them up for me. they are basically stock lifters, with a custom link bar.Comment
-
i thought you said one side was for a SBC and the other side was for a 3800 due to the oiling.Andy
sigpic
fastest 1/8: 10.19@ 67.17
fastest 1/4: 16.16@ 82.70
62mm TB, 1.6 roller tip rockers, Ostrich 2.0, UD pulley, TB heater bypass, K&N, 180* stat, No cat, 99Grand AM dual cooling fans. 4T65E swap FDR 3.69, EP LSD, F.A.S.T. transmission controller, TransGo shift kit.
Comment
-
yep, that's correct, but with a custom size link bar. The only custom part is the link bar.Comment
-
well i may be able to make my own link bar or find aa way to make a facotory anti rotaion unit work. but what cam did you use, was it custom ground or is it based on a roller 3x00 motor cam.Comment
-
Custom cam as I mentioned. Crower did it for me. I know schneider cams also has done roller cams for the 3.1.Comment
Comment