just got finished rebuilding 3400 for 92 corsica .little thumper cam from ben ,ported upper and lower ,heads have ls spings ,seats and seals from ben ,3 angle vavle job,65 mm tb, WOT-TECH swap chip ,22.5 injectors ,2 1/2 " exhaust .car runs and revs great in park but when driven it worse than stock 2.8 .my question is will stock fuel pump keep up with this engine.
Announcement
Collapse
No announcement yet.
all bark no bite
Collapse
X
-
its 55psi, fuel pressure seeem to jump around a little when reving ,the only code was iat ,only because it wasn't hook up ,ks is from the 3.1 engine ,crazy thing is this the second 3400 engine in this car the first one was stock, put it in a 2000 ga runs great ,did the new engine for the corsica ,it slower than the stock3400 and 3.1. I also changed tranny and converter now it has 2700 stall and 306 fd.
Comment
-
Any sort of logs from driving to see what the ECU is reporting?
Got Lope?
3500 Build, Comp XFI Cam 218/230 .050 dur .570/.568 lift 113LSA
Fully Balanced, Ported, 3 Angle Valve Job, 65mm TCE TB, S&S Headers.
Stage-1 Raybestos/Alto 4t60e-HD, EP LSD, 3.69FDR
12.61@105 Epping NH Oct 2015 Nitrous 100shot (melted plugs) 13.58@98.8 N/A 3200LBS
Comment
-
If its not a custom tune for those mods, then its not going to run very well. The 3400 swap chip isn't for a little thumper cam. Your fueling is based on vacuum, which is significantly different than the stock cam.Last edited by SappySE107; 09-17-2014, 09:05 AM.Ben
60DegreeV6.com
WOT-Tech.com
Comment
-
don't have the equipment to data logg just yet ,will have by next week though .car run fine under normal driving ,its just at wot .just did 3400 swap and 3.33 fd on 96 z26 car runs strong ,just want to straighten things out before the engine build on this car is finished witch has already began
Comment
Comment