Tweet
I have 3.4 block, 3400 pistons, upper intake,and tb, 3500 heads and lower intake. Will 3.4 headers bolt up or do I need 3500 headers?
-
-
what car/truck?"I am not what you so glibly call to be a civilized man. I have broken with society for reasons which I alone am able to appreciate. I am therefore not subject to it's stupid laws, and I ask you to never allude to them in my presence again." -
95 CamaroComment
-
With some modifications to the port flange and primary, you use the headers that will fit your vehicle.Comment
-
Will the ports and bolts match up to the 3500 heads?Comment
-
Originally posted by The_Raven View Post
Slot dem holes!
sigpic
"When you don't do anything, you have plenty of time to post questions that don't mean anything tomorrow."
- BenComment
-
I'll do that, hopefully it's all stuff I can do lolComment
-
It's easy and obvious what needs to be done when the parts are in habd'89 Firebird, 3500 Turbo, T56, 9-bolt/4.11
'86 Fiero, 3500, 4-speedComment
-
Slotting the holes works for mounting but the typical 1.5" primaries on those 3.4 headers are tiny. Hopefully you can find some that are 1 5/8".
If you are fairly close to eastern Iowa I have some proper longtubes that you can test fit.Comment
-
-
They were on a 3500 in a 3rd gen Camaro, but with the different K member your car has they might fit. 1 5/8" primaries, 32" long with correct D port flanges and V banded collectors, Ceramic coated.
I'd do $450 but we'd have to make sure they'll fit first.Comment
Comment