Announcement

Collapse
No announcement yet.

35/3900 VCT phaser

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    35/3900 VCT phaser

    does anyone have any exploded diagrams available for the Cam phaser on the gen 4 motors? I know that they can change timing up to 40 degrees, but that is the only technical data I have on them.
    "I am not what you so glibly call to be a civilized man. I have broken with society for reasons which I alone am able to appreciate. I am therefore not subject to it's stupid laws, and I ask you to never allude to them in my presence again."
    Tags: None
  • #2
    Delphi Technologies is now part of BorgWarner - BorgWarner
    http://delphi.com/manufacturers/auto/powertrain/gas/valvetrain/vcp/


    I read through in a little more detail, and it appears to be of similar design, but I'm still looking for diagrams of the 3900 phaser specifically.
    Last edited by ericjon262; 02-25-2013, 12:09 AM.
    "I am not what you so glibly call to be a civilized man. I have broken with society for reasons which I alone am able to appreciate. I am therefore not subject to it's stupid laws, and I ask you to never allude to them in my presence again."

    Comment

    • #3
      any specific reason? alldata isn't giving me anything useful.

      the way it works in the 3500/3900(assuming i'm remembering it correctly), is that when given no signal, the cam is in the fully advanced position, change the duty cycle of the signal to control the amount of retard.
      1995 Monte Carlo LS 3100, 4T60E...for now, future plans include driving it until the wheels fall off!
      Latest nAst1 files here!
      Need a wiring diagram for any GM car or truck from 82-06(and 07-08 cars)? PM me!

      Comment

      • #4
        I really need fluid diagrams that show exactly how fluid flows through the actuator. there's a very good possibility that I may build something to make it VVT instead of VCT... !
        "I am not what you so glibly call to be a civilized man. I have broken with society for reasons which I alone am able to appreciate. I am therefore not subject to it's stupid laws, and I ask you to never allude to them in my presence again."

        Comment

        • #5
          hmm....

          i can't find any diagrams from GM....

          http://www.fiero.nl/cgi-bin/fiero/showThread.cgi?forum=Archive-000001&thread=20110502-2-080440&style=printable


          that's the closest i can get.
          1995 Monte Carlo LS 3100, 4T60E...for now, future plans include driving it until the wheels fall off!
          Latest nAst1 files here!
          Need a wiring diagram for any GM car or truck from 82-06(and 07-08 cars)? PM me!

          Comment

          • #6
            That does help a little, thanks!

            I'm going to try to get a part number and manufacturer info, and see if they will let me in on any of the details, worst case, I'll see if I can get one from someone who is converting to non VVT... you reading this Mars?!
            "I am not what you so glibly call to be a civilized man. I have broken with society for reasons which I alone am able to appreciate. I am therefore not subject to it's stupid laws, and I ask you to never allude to them in my presence again."

            Comment

            • #7
              Ve-tak kicked in yo...

              If you want to control the VVT, VCT, whatever you want to call it, look at diyautotune.com. They have a cam position controller that I was looking at when I almost bought a 3900.

              Comment

              • #8
                I may buy another spare motor in the near future, in which case I'll sell it for cost of shipping. My usual goto auto wrecker has no 3.9's at the moment...
                11.92 @ 122 MPH 3400 91 Cavalier Z24 Intercooled S/C. -totalled-
                10.56 @ 130 MPH 3900 LZ9 87 IROC Z28 Intercooled GT4088 Turbo

                Comment

                • #9
                  Originally posted by Mars View Post
                  I may buy another spare motor in the near future, in which case I'll sell it for cost of shipping. My usual goto auto wrecker has no 3.9's at the moment...


                  AWESOME! I posted a thread in the mall, I might be interested in more then just the actuator...

                  Originally posted by ericjon262 View Post
                  I'm looking for a cam actuator/related components, does not have to be in working condition, but assembled and complete.

                  I'm looking for

                  Phaser
                  Cam gear
                  camshaft(maybe)
                  timing cover (maybe)


                  I'll be up front and say I don't want to pay much for them because I'm just going to take them apart, so if you're holding onto one thinking it's worth something, I'm not interested ATM...

                  Shipping would be to 32504

                  Thank you-

                  Eric
                  Last edited by ericjon262; 02-25-2013, 02:47 AM. Reason: thread not link!
                  "I am not what you so glibly call to be a civilized man. I have broken with society for reasons which I alone am able to appreciate. I am therefore not subject to it's stupid laws, and I ask you to never allude to them in my presence again."

                  Comment

                  Previous template Next
                  Working...
                  X