3500 sensor question

[ericjon262]

just above the crank sensor on my 3500, there's a sensor or device of some kind, it's rather large and has 3 larger wires going to it.

what is it? anyone know?

[Fastmax32168]

I think you will find you have one on each side. I think its a knock sensor.
Roy

[ericjon262]

no, this device is only on the back of the motor (right side)

[Fastmax32168]

Mine had one on each side of the motor. I am still going with knock sensor. Mine went in the trash, whatever they are I didnt need them.
Roy

[ericjon262]

if this is a knock sensor, it's the biggest one I've ever seen...

[Fastmax32168]

Does it look like this?

[gar70614]

Is it round with a 15mm bolt going through the middle of it?

[ericjon262]

nope, already said, not a knock sensor.

[ericjon262]

here's a pic...

[Fastmax32168]

Hmmm. My 3500 has a plug in that hole. And my right knock sensor was in the hole just above and to the left of it. It looks like a water temp sender to me. Hopefully somebody can identify it for sure.

[CNCguy]

Never seen one in an LX9 but wouldn't be surprised if it's a block heater.

[Kaiju Senso]

There is a big plug right there in my LNJ Block

[boomofdoom88]

Thats exactly what it is. The engine probably came from a van.

http://www.compnine.com/modimg.php?i...16TU01-005.gif

[ericjon262]

it's an Engine block heater!( car was from Minnesota!)

boomofdoom88, that site is very helpful! thanks for sharing!