These same performance heads again!!one!11

[Guest]

Ok I remember seeing them on ebay a few months ago. I guess its been over 3 months or something as I went back through their old auctions.

But anyways Zigorous racing heads for the iron head motors.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33617&item=7907891411&rd=1

I remember seeing these a few months back. I guess they sold them on ebay or something. Either way here they are again. This is the second set of supposed experimental sets of heads that I have seen come from these people.

How come is it, that after 3 or so months they still use the same pictures? And that they still have no new ones?

I thought these were some type of deal with a guy named Tiago or something like that from a different board. If he is a true 60 degree guy then wouldnt' he have better pics by now?

Should I just ask him in am email or what?

A 6 angle valve job on just the seat? WTF am I crazy here or does that seem rediculous? You add 1 or 2 angle degree cuts to the valve as I have done most of the time and now you end up with a 7-8 angle valve job? Come on now. Does that sound excessive?




Unless someone knows here for sure I will send an email to the guy.

Shaun

[xxrollin]

It looks like those heads are sitting in a sand blasting machine and the chambers look like they've been sandblasted. And if he says they've been CNC'd, why would those heads be sitting on a manual mill's table with a fly cutter. $1000 wouldnt even cut the programers bill for a real CNC job anyway. "The heads have been CNC machined, CNC ported, hand ported" << why???? Still not a bad price if those are the actual heads.

[MarkJPana]

hm...Brockton, MA. thats only like 30 minutes from me. sucks that im working a 42 hour workweek this week. oh well, im sure we'll see them again sometime.

[bszopi]

What's up with the single color / B&W photos?

[TurboZ24]

They look like stock heads, with a cleaned up deck and header mounting flanges.

http://www.turboz24.com/Pics/Current_Engine_19.JPG

That's the view of the stock combustion chamber (looks identical too me).

http://www.turboz24.com/Pics/Current_Engine_20.JPG

Exhaust side, and except the lack of decking the exhaust manifold surface, looks the same there too.

[geoffinbc]

There is such a thing as a 6 angle valve job. It makes air flow smoother but wears out too fast for street use.