Tweet
Where did you get your ITB or is it custom? I would love a set.
-
-
Marc at TCE made them, it's a prototype set and I don't know for sure if he's going to make any more.Comment
-
I'm sure he'd sell them to you if you made the right offer...
1990 ASC/McLaren Turbo Grand Prix 3500 swap GT3076R turbo 40lb/hr injectors FMIC LX9 coils Megasquirt2 v3.0Comment
-
FWIW, i'm actually working on code to run the VVT and VI solenoids on the $A1 mask using just a standard 7727... i MAY move up to a 9396 for the extra RAM, but i'm looking to avoid that if at all possible, to allow all of the 7730 guys to run it as well.Comment
-
Cool, make a new thread for that when you get around to it. That way I can copy your ideas and translate it to megasquirt
1990 ASC/McLaren Turbo Grand Prix 3500 swap GT3076R turbo 40lb/hr injectors FMIC LX9 coils Megasquirt2 v3.0Comment
-
MS devs already have VVT code, I just need to know how it works.
But if you want to send me the code, I could build a circuit in Multisim. Maybe someday have a stand alone controller.
Here's the link to the MS VVT stuff
Last edited by Jonpro03; 02-24-2011, 11:38 AM.
1990 ASC/McLaren Turbo Grand Prix 3500 swap GT3076R turbo 40lb/hr injectors FMIC LX9 coils Megasquirt2 v3.0Comment
-
Could you find out if he would make another set, and for how much? I was debating on fringe to make my own.Originally posted by Superdave View PostComment
-
DIY Standalone VVT controller for the Miata...only a matter of time before its made for other applications or made into a universal controller
Anyway we could get some closeup pics of the ITB's?RIP - 94 GP SE
DD - 95 GP SE
Fun - 91 Mercury Capri XR2 Turbo AWD Conversion
http://www.werbatfik.comComment
-
$200?
LOLOL, and here i want to release the VVT/VI control, spark/VE enhanced A1 as open source...Comment
-
I would also like a close up of the itb's how did you work it out?Comment
-
I'll direct him to this thread.. and i guarantee they won't be cheap.. lolOriginally posted by Shane View Post
robertisaar, if you delete all the trans control code at the end there should be plenty of room... i have a bin that used that space for a whole new VE table but it was still messy and un-tested. I'm switching to DOHC code to run the Camaro so i gave up on that bin.Comment
-
actually dave, even with all of the F31 stuff there, there's around 3000 bytes free on a 32K $A1 PROM, and even with my 17 X 17 3 tabled VE and spark tables(which work wonderfully BTW), there's still PLENTY left for the VVT code. i have quite a bit in mind actually, may even need to move up to a 64K BIN...
Comment
-
ooh, i'd like to see that sometime..
Comment
-
Dude those itb's are bad ass!Comment
Comment