HT3.4 Specs??

[GEARS]

I am trying to get stock specs for my GM HT3.4 crate motor to maybe play with the CR a little. This is what I have... are any of my numbers wrong??

Calculator=
Bore: 3.62"
Stroke: 3.31"
Chamber Volume: 53 cc
Head gasket thickness: 0.035"
Head gasket bore: 3.65"
Piston to deck height: 0.064" <------ Back tracked to get
Piston type: Flat Top
Dome volume: 0 cc <------ as far as i know there is no dome or dish right??

***All of this equals 9:1 CR

Does all of this look correct for my HT3.4??

[geoffinbc]

There is a dish. Use the stock numbers from the drop down list to get your starting point.

[60dgrzbelow0]

I am trying to get stock specs for my GM HT3.4 crate motor to maybe play with the CR a little. This is what I have... are any of my numbers wrong??

Calculator=
Bore: 3.62"
Stroke: 3.31"
Chamber Volume: 53 cc
Head gasket thickness: 0.035"
Head gasket bore: 3.65"
Piston to deck height: 0.064" <------ Back tracked to get
Piston type: Flat Top
Dome volume: 0 cc <------ as far as i know there is no dome or dish right??

***All of this equals 9:1 CR

Does all of this look correct for my HT3.4??

Some more reference information on the GM HT Crate Engine...

https://www.sallee-chevrolet.com/PDF/HT3.4IntallationInstructions.doc

http://www.s-series.org/htm/tech/GMPerfParts/034-039.pdf