3x00 SC setup, from the factory

[bszopi]

I should just post the pics, but I'm lazy.

http://www.grandamgt.com/forum/showthread.php?t=36118

You'll never see it, but its a pretty sweet, one-off setup... and its for sale.

[RacerX11]

Nice setup. Makes me want to rethink the mounting and plumbing on my setup.

Marty

[extremeskiier728]

its for sale?

[RacerX11]

Yeah...only $4500. Its a steal!

Marty

[donk_316]

You can build that easy if you think about it. not hard at all.

[bszopi]

Take a quick look at the manifold. Its a 1-piece, sand cast manifold. Not really that easy to fabricate. Something similar, perhaps... if you can TIG weld.

[extremeskiier728]

man i wish i had 4500$

[RacerX11]

Take a quick look at the manifold. Its a 1-piece, sand cast manifold. Not really that easy to fabricate. Something similar, perhaps... if you can TIG weld.

If you look at the third pic, it looks like they took a stock manifold and cut the TB neck off, welded some flat aluminum to fill the hole, and ground it smooth. Defintely a job for a TIG welder.

If I had another 10" of hood clearance, this would work

Marty

[Drenis]

Hmm... Wonder if it would fit the Impala bay?

[mfewtrail]

http://images.cardomain.com/member_images/11/web/227000-227999/227319_2_full.jpg

There are a couple of setups like the above out there besides this one, I used to have pictures of around 5 or 6 cars w/ this identical setup, I lost them when my harddrive crashed about 1.5 months ago..I'm sure others have posted about this particular setup here before????

[mfuller]

None are identical to this, since all the others are not intercooled. This is a truly unique piece, but will require quite a bit of effort (and $$$) to make it work.

[mfewtrail]

None are identical to this, since all the others are not intercooled. This is a truly unique piece, but will require quite a bit of effort (and $$$) to make it work.

I was saying that some setups were identical to the picture I posted, not the setup posted about here originally. I should have made that clear in my initial post.

[GTPprix]

Actually it will fit in an impala bay it may require a custom hood, but I'll check clearances for you if you'd like

[Drenis]

Actually it will fit in an impala bay it may require a custom hood, but I'll check clearances for you if you'd like

Please do.

[GTPprix]

Ok my 60 degree equipped W-Body is nowhere to be found right this second I'll have to get back to you