Tweet
I am interested in a cam upgrade on my 3400 cavalier, something aggresive but I don't want to cut pistons, any one know of an inexpencive cam/spring set up
-
-
define "inexpensive"
-
i dont know if i would trust this guy, but i think he's one of only a few that sells them:
I think all this 'aggressive cam' phase is being caused by 3400-95-modified haha
Last edited by bob442; 03-03-2010, 07:54 PM.Comment
-
lol yea that sounds sic, Im going to be building a set of headers for my cav, and figure if im pullin the 3400 to re gasket it, id try to get a bump stick for it.
my target is 300+whp............even if I gota spray it alitle to cool down the intake air temps lolLast edited by highmiler; 03-04-2010, 09:28 AM.Comment
-
Well.. since i currently have the record for N/A WHP in a V6 Jbody i'll say that you are going to need a lot more than a cam and headers to beat me. You will have to spray it to get 300 WHP.Originally posted by highmiler View Post
I'm at 275 WHP with a huge cam in a 3500, longtube headers, ported top end, 75mm TB, true duals and a 3.5" CAI and lots of tuning. That is with a 5 speed.Comment
-
well my car has a ported m62 on top of a 3500 plenum. I ported a set of 3500 heads and have them almostready to go, then like I said im making long tubes..I am also going to need a clutch( it slips under boost in 3rd and 4th).. but any advice is alwase welcome
damn thats na YOU ARE NA GOD!!!!!!!!!!!!!!!!!!!!!!!!!!!!Last edited by highmiler; 03-04-2010, 08:26 PM.Comment
-
damn I have drooled over this car on youtube..I think!!!!!!!!!!!!!!!!!!!!!!!
you live in Iawa sic, do you go to ceder falls?Last edited by highmiler; 03-04-2010, 08:27 PM.Comment
-
It's been a few years since i've gone to CFR, my home track is in Cordova, IL.
what year is your cav?Comment
-
its a 1996 cavalier 2.2 car with ....I think a Isuzu trans??? I swapped in a 3400 out of a 2001 grand am gt self tunned with a Megasquirt, then a Eaton M62 Off of a Bonneville that I ported, and im running a vortec 5.7 throttle body.
I normally run at rockfalls, WI with my lt1 camaro(11.56 on a 80hp dry shot) but I have not ran this car yet. man huge props on the numbers on the rollers! that is numbers the 5.0 guys dream of lolComment
-
Hey Dave, do you have any videos of your camaro? i couldnt find any when i searched...Comment
-
Post pics....
Lolsigpic
New 2010 project (click image)
1994 3100 BERETTA. 200,000+ miles
16.0 1/4 mile when stock. Now ???
Original L82 Longblock with LA1, LX9, LX5 parts
Manifold-back 2.5" SS Mandrel Exhaust. Hardware is SS too.
Comment
-
Sweet! (and Thanks)Originally posted by highmiler View Post
Not unless you want to see a straight piped, cammed 327 barely start... throw black smoke when you rev it up and not move because the trans is dead.Originally posted by bob442 View Post
I have yet to start on it, it won't be too long before it's on the road though.
Comment
-
I cant figure out how to post just a pic............ but here is the ones that i have at ls1 tech
Comment
-
superdave, who did you have your cam made by if you don't mind me asking?
if you ever want anything tig welded or powdercoated, or a cage bent up, I have all kinds of tools for fun stuff .....FYIComment
-
I got mine before WOT-Tech really started with theirs. I bought a stock solid core from Ben (wot) and had it custom ground at Delta camshaft.
These days just getting a new roller from Ben is a much better deal, i'm considering getting a new one myself down the road.Comment
Comment