new guy, 3.4L hibred build

[bszopi]

Steel pan only, as the mounting of the aluminum pan is different.

[ForcedFirebird]

Steel pan only, as the mounting of the aluminum pan is different.

Quite different....

http://s158.photobucket.com/albums/t87/forcedfirebird/Gen1%20and%203500%20oil%20pans/

[dusterbd13]

as far as the pulleys and front drive setup, i plan to use the stuff from my 2.8 thats being pulled for the 3.4 (87 s10). it looks like ill need to make some spacers, etc and i dunno if the AC compressor will clear. other than that, looks good and easy.
use the timing cover, oil pan, water pump, accessories and brackets from the S10
i know ive seen a few other swaps like this, and i seem to recall that the brackes required a new hole being drilled somewhere as well.

michael

[ForcedFirebird]

The brackets will work with the holes enlarged and/or re-drilled on the serp belt drive. Only problem I had was the alternator was close to the TB and may need some addressing.