Tweet
Hey everyone, I own a 96 Cutlass Supreme 2 door and my cruise control has been dead for a while now....I would like to know what I should be looking for.
The module is in good condition, the electrical plugs are hooked up correctly, and the cable is nice and taught. I think the problem lies with the switch, but before I start taking my column apart I wanted to know if anyone around here has done the same, or had CC problems.
The blinkers work and so do the wipers lights etc, just the cruise is non-functional. I have had to replace the ignition in the car because the wires were stretched, so I am wondering if the cruise is also stretched and not connecting properly.
I am 6'7'' so that is why the ignition had to be replaced, I drive with the tilt wheel almost all the way up!!!
Thanks alot guys, good forum by the way, been coming here for about 4-5 years, just haven't joined until now!!!!
The module is in good condition, the electrical plugs are hooked up correctly, and the cable is nice and taught. I think the problem lies with the switch, but before I start taking my column apart I wanted to know if anyone around here has done the same, or had CC problems.
The blinkers work and so do the wipers lights etc, just the cruise is non-functional. I have had to replace the ignition in the car because the wires were stretched, so I am wondering if the cruise is also stretched and not connecting properly.
I am 6'7'' so that is why the ignition had to be replaced, I drive with the tilt wheel almost all the way up!!!
Thanks alot guys, good forum by the way, been coming here for about 4-5 years, just haven't joined until now!!!!
Comment