Tweet
well, today i got the old fuel plumbing ripped out, and filler tube out. got the feed, and return lines ran. makin progress! sorry no pictures of tubing but ill get some.
-
[SIGPIC]
12.268@117... 11's to come!
turbo 3400: 358whp and 365tq at 9 psi
ASE Master Technician. GM Certified.
http://www.youtube.com/watch?v=7ibU1k8UZoo
http://www.youtube.com/watch?v=GUqJyopd720 -
rest of the parts are pretty much on their ways! 4'' piping, borla xr muffler, bends etc. rest of the fittings to finish the fuel system. pump is here, 65# siemens injectors here, fittings and braided hoses for clutch, vacuum lines, coolant hoses. just need to install the harness and megasquirt i built, one hybrid cv axle (12'' f body brake swap), and new shift cables. gettin close! i can hear this beast run in my head!
[SIGPIC]
12.268@117... 11's to come!
turbo 3400: 358whp and 365tq at 9 psi
ASE Master Technician. GM Certified.
http://www.youtube.com/watch?v=7ibU1k8UZoo
http://www.youtube.com/watch?v=GUqJyopd720Comment
-
well another update. new lower engine mount done, all 5 speed brackets swapped to rear mounts, got the downpipe tacked(waiting for a flex section), got the wastegate and dump tube tacked. welded up a new slave cylinder mount , repositioned factory arm to allow slave locatioin. also got the braided hose on it, and bled the system. lots more fittings installed and put on. sorry for the crappy quality photos, they were taken with my blackberry..
[SIGPIC]
12.268@117... 11's to come!
turbo 3400: 358whp and 365tq at 9 psi
ASE Master Technician. GM Certified.
http://www.youtube.com/watch?v=7ibU1k8UZoo
http://www.youtube.com/watch?v=GUqJyopd720Comment
-
[SIGPIC]
12.268@117... 11's to come!
turbo 3400: 358whp and 365tq at 9 psi
ASE Master Technician. GM Certified.
http://www.youtube.com/watch?v=7ibU1k8UZoo
http://www.youtube.com/watch?v=GUqJyopd720Comment
-
i like that front header!Comment
-
Great job man i cant wait to see this thing up and running1994 Buick CenturyComment
-
yeah youre telling me... lol. soon enough it will be in running order.[SIGPIC]
12.268@117... 11's to come!
turbo 3400: 358whp and 365tq at 9 psi
ASE Master Technician. GM Certified.
http://www.youtube.com/watch?v=7ibU1k8UZoo
http://www.youtube.com/watch?v=GUqJyopd720Comment
-
new update, got some more things done. got some parts powder coated. shot the intercooler with a light coat of flat black to keep it unnoticed. final wiring is being installed, megasquirt mounted.
[SIGPIC]
12.268@117... 11's to come!
turbo 3400: 358whp and 365tq at 9 psi
ASE Master Technician. GM Certified.
http://www.youtube.com/watch?v=7ibU1k8UZoo
http://www.youtube.com/watch?v=GUqJyopd720Comment
-
got the spare tire well finished up. welded up a patch panel so i could mount my fuel cell, also zinc primered the trunk/underbody (still need to silicon gaps from the stamping). fuel pump/filters ran to the feed line, return i still need one more fitting and it will be complete. battery box installed, and put in a new battery.
[SIGPIC]
12.268@117... 11's to come!
turbo 3400: 358whp and 365tq at 9 psi
ASE Master Technician. GM Certified.
http://www.youtube.com/watch?v=7ibU1k8UZoo
http://www.youtube.com/watch?v=GUqJyopd720Comment
-
Nice dude. Clean.Comment
-
super busy with other projects, but im making good progress! still need a driver's axle to hybrid for my brake swap, still need a cable for my megasquirt to my laptop... and some small things here and there to button up yet..
[SIGPIC]
12.268@117... 11's to come!
turbo 3400: 358whp and 365tq at 9 psi
ASE Master Technician. GM Certified.
http://www.youtube.com/watch?v=7ibU1k8UZoo
http://www.youtube.com/watch?v=GUqJyopd720Comment
-
very nice!Andy
sigpic
fastest 1/8: 10.19@ 67.17
fastest 1/4: 16.16@ 82.70
62mm TB, 1.6 roller tip rockers, Ostrich 2.0, UD pulley, TB heater bypass, K&N, 180* stat, No cat, 99Grand AM dual cooling fans. 4T65E swap FDR 3.69, EP LSD, F.A.S.T. transmission controller, TransGo shift kit.
Comment
-
sigpic
"When you don't do anything, you have plenty of time to post questions that don't mean anything tomorrow."
- BenComment
-
What am I missing... That looks like a huge ass nitrous bottle... Spraying the inter-cooler with it? Or am I wrong all together.
Got Lope?
3500 Build, Comp XFI Cam 218/230 .050 dur .570/.568 lift 113LSA
Fully Balanced, Ported, 3 Angle Valve Job, 65mm TCE TB, S&S Headers.
Stage-1 Raybestos/Alto 4t60e-HD, EP LSD, 3.69FDR
12.61@105 Epping NH Oct 2015 Nitrous 100shot (melted plugs) 13.58@98.8 N/A 3200LBSComment
-
i was wondering who was gonna be the first to ask.. ive got a 35 wet shot i plan on running, and my purge will be an intercooler sprayer setup. its a 20lb bottle, but its tooooo big to fit in the trunk with a 15 gallon fuel cell in the trunk, so im tryin to trade straight up for a 10lb bottle.[SIGPIC]
12.268@117... 11's to come!
turbo 3400: 358whp and 365tq at 9 psi
ASE Master Technician. GM Certified.
http://www.youtube.com/watch?v=7ibU1k8UZoo
http://www.youtube.com/watch?v=GUqJyopd720Comment
Comment