Tweet
So I did that "Death Clock" thing and it says I'm going to live to be 87???
I'm going to be 58 in July.
Any chance I'll see these before the END???
I'm going to be 58 in July.
Any chance I'll see these before the END???
-
-
here is the update
apparently when crane went down, it took alot of companies with it that they used as suppliers, namely alum suppliers and such. one of those such companies also supplied for scorp at the time. that company has since shut its doors and is no longer going.
So as of todays update, scorp has found another supplier, but they have to get new test material in from a few of them to make sure they are good and will work. They have had a prob before with bad material and it caused alot of probs. They do not want to risk that again. So, yes it is taking longer than expected...will it be worth the wait?
HELL YESComment
-
See now THAT makes sense and is a reasonable and intelligent response.
THANK YOU!!
Hell I have 29 years to go!Comment
-
LMAO!!!!Originally posted by asylummotorsports View PostsigpicHow to make High performance Emissions:
A "true" High flow converter, straight pipe.
Low/No flow EGR valve, block off plate.
Carbon canister and purge valve mod, place in large 30 Gallon can, cover, and place curbside, the city will do the rest.
PCV valve and vent tube, reroute to exhaust to dump where it belongs, on the ground. Or add breathers and let it all free.Comment
-
See, I don't know why everyone is fussing about these rockers...
When they do become available to public we will not have oil for our engines anymore to utilize the mod.
Lifting my front wheels, one jack at a time.Comment
-
What about gas? lolOriginally posted by 1988GTU View PostSee, I don't know why everyone is fussing about these rockers...
When they do become available to public we will not have oil for our engines anymore to utilize the mod.
Got Lope?
3500 Build, Comp XFI Cam 218/230 .050 dur .570/.568 lift 113LSA
Fully Balanced, Ported, 3 Angle Valve Job, 65mm TCE TB, S&S Headers.
Stage-1 Raybestos/Alto 4t60e-HD, EP LSD, 3.69FDR
12.61@105 Epping NH Oct 2015 Nitrous 100shot (melted plugs) 13.58@98.8 N/A 3200LBSComment
-
hell, by the time these come out, i can actually afford to buy a set. works for me!
Andy
sigpic
fastest 1/8: 10.19@ 67.17
fastest 1/4: 16.16@ 82.70
62mm TB, 1.6 roller tip rockers, Ostrich 2.0, UD pulley, TB heater bypass, K&N, 180* stat, No cat, 99Grand AM dual cooling fans. 4T65E swap FDR 3.69, EP LSD, F.A.S.T. transmission controller, TransGo shift kit.
Comment
-
That's exactly how I have been thinking.Originally posted by torq455 View Posthell, by the time these come out, i can actually afford to buy a set. works for me!
Comment
-
guys, it doesn't take that long to scan the bills, sequence them in paint, and print them through the color laser printer, then all you have to do is apply the water mark, and i know a guy for the hologram image.....
oh hell wrong thread!
um ya we'll have the money when they're ready!
sigpicHow to make High performance Emissions:
A "true" High flow converter, straight pipe.
Low/No flow EGR valve, block off plate.
Carbon canister and purge valve mod, place in large 30 Gallon can, cover, and place curbside, the city will do the rest.
PCV valve and vent tube, reroute to exhaust to dump where it belongs, on the ground. Or add breathers and let it all free.Comment
-
Don't forget to put the bills in the dryer. They can't look too crisp.
Your local OBDII moderator
2000 Grand Am GT w/ WOT partsComment
-
just put them in my back pocket...ill take care of them and make sure they are well spent.....er worn...hehComment
-
I wonder in what direction this thread will go next?
I bet it's not about rocker arms.
Let's see, we got through April Fool, the Crane Cams purchase, my impending death without rocker arms, and now making your own currency.
How about "Fat Chicks in Party Hats"?
That is always a favorite with my fellow Beretta-ites.Last edited by asylummotorsports; 05-12-2009, 02:59 PM.Comment
-
i'd rather like to see this thread go more towards hot chicks in party hats!Andy
sigpic
fastest 1/8: 10.19@ 67.17
fastest 1/4: 16.16@ 82.70
62mm TB, 1.6 roller tip rockers, Ostrich 2.0, UD pulley, TB heater bypass, K&N, 180* stat, No cat, 99Grand AM dual cooling fans. 4T65E swap FDR 3.69, EP LSD, F.A.S.T. transmission controller, TransGo shift kit.Comment
-
I know the L body owners love the fat chicks in party hats. You guys can keep it to yourselves:PBen
60DegreeV6.com
WOT-Tech.comComment
-
NO FAT CHICKS!
I vote for latin girls, 95-110lbs, 4'11''-5'2'', with the butts that go out enough to rest a beer on! OH! and wearing nothing but party hats!sigpicHow to make High performance Emissions:
A "true" High flow converter, straight pipe.
Low/No flow EGR valve, block off plate.
Carbon canister and purge valve mod, place in large 30 Gallon can, cover, and place curbside, the city will do the rest.
PCV valve and vent tube, reroute to exhaust to dump where it belongs, on the ground. Or add breathers and let it all free.Comment
Comment