Lifters?

[Blue6000se]

Well i wasn't told that it was for iron heads but if you want here are the part numbers for the springs and retainers
P/N12363215 - springs
P/N12363216 - retainer

Okay if i were to ditch this idea what would be more horsepower for the dollar, i know your 3500Z is one nasty car very nice

[Superdave]

If you allready bought the cam i may know someone who is looking for the H260-2 for his gen2 build..

I'd go with a stage 1 or 2 from the WOT-tech store, toss in some Comp 26915 springs (26915-12 on Summit) then of course.. tune it


thanks BTW

[Blue6000se]

Well ill keep that in mind, everythig with cam, retainers and springs was almost $300 if anything i'd like to get at least half that.

Thanks for the info.

[Blue6000se]

So does anyone know what i should do about the lifters cuz all my friends are telling me i need to use flat tappet lifters and where could i get a set.

[Superdave]

so you are going to use that cam then?


flat tappet lifters can be purchased at any parts store.. just ask for lifters that fit a 3.4 Camaro. you'll need to measure and order custom pushrods and also pick up a timing chain set for a FWD Gen2 engine (94 or older 3.1/2.8 ).


I think you are going to spend more money trying to get that flat tappet cam working then you would just getting the propper roller cam for it.. lol

[merlot566jka]

ive got a brand new set of sealed power flat tappet lifters i can sell for $80

[IsaacHayes]

Yeah sell that cam and get the proper cam that works in the 3100.

[Superdave]

Andrew is joining up here to talk to you about that cam, he wants it for his 3.1 build