Ironhead Autocrosser

[Ortie666]

Here is a little clip of this cars 1st autocross.. Threw the slalom straight the motor was reving over 6800 rpm at one point..(Goes to show Windage trays&crank scrapers are great...."so is 20w50") A while back I had posted a video of the same car running on nitrous and the question was asked to get a video from outside the car, So here it is..
Coments are much welcome

http://videos.streetfire.net/video/650e1b3b-9990-4669-8268-99c501343341.htm

[geoffinbc]

Looks good. Sounds like a wide open exhaust.

[Ortie666]

There's some muffler there to keep it quiet under 3 grand.. its one of my custom designs..

[camaro1991]

what do u think it will get in the 1/4?

[Ortie666]

this one isnt all that fast.. It only does a 15 somthing on motor with a 1.9 60 foot time, reasoning to why I put the bottle in it, and on the 180 shot I tied with a porsche carerra there suposed to be an 11.4 car.. i thought that was a little far fetched so i used one of those quartermile calculators, and it clames that if im running the 180 shot its good for 11.2, so I think were going to bump the timing all that way back, run some racegas, and then see what it does on the 180 side

[Superdave]

Damn you for making me want a lighter car

there is a 2 door manual Chevette at the JY burried in the back, it's in near mint shape..

[CNCguy]

I just picked up an '86 Chevette with a very solid body. Was planning to do a mid engined Mini Cooper but came to the realization that I just don't have the time. I figure the Chevette will give me RWD, be a good base for testing some of our products, be fairly easy to get going and be a nice sleeper. The 3900 will end up in it after it's assembled and finished with it's other tests.