MAF Conector..Where is it

[john_V63400]

2001 grand AM GT
Im trying to put my MAF back on I thaught I found the conector but I canot find it, are u sure I got the right MAF for my car Superdave

[john_V63400]

Does anyone know where it comes out from so I can find it, I wasnt the one who disconected it so I wouldnt know

[whitelightnin04MC]

The maf connector is in the same group of wires with the TPS, IAC, IAT, and EVAP connectors. It should be right near the throttle body.

[Blackrider]

I hope the RSM dumbasses didnt rip it off.

[john_V63400]

I looked there i vant find it, WTF so mad

[Blackrider]

I looked there i vant find it, WTF so mad

Can you find any loose wires?

[IsaacHayes]

If they did you could get a new pig tail and pull back the harness until you found the wires. Then solder and heatshrink the pigtail back in.

If it's the same connector as an LS1, then it would look like this. That site you can order pig tails too if it's the right one and you need it.

[whitelightnin04MC]

I think the stock MAF has a 4 terminal plug, not a 5 terminal one.

[Azrael]

It's probably wrapped up in a mountain of electrical tape somewhere to get it out of the way.

[PCGUY112887]

x2, no reason for anyone to hack it off, gotta be around

[IsaacHayes]

You never know with zspec/rsm...

[geldartb]

with all the other sensors hooked up you cant get more than 4 or so inches it cant be far.

if you can find the wires but no plug i can get you a plug real cheap. just pay shipping.

[3400-95-Modified]

did you install this kit or did Zspec install the supercharger?

[john_V63400]

Can anyone with a V6 GRand Am here give me the number on the back of the MAF connector, maybe its connected wrong somewhere, if someone can please give me the # on the back of the connector I would really apreciate it so much

[IsaacHayes]

What do you mean connected wrong somewhere? You just gotta find where they put the pigtail or where they cut the wires.