Tweet
i was looking at a new equinox, and the upper intake on it goes out on the passanger side, instead of drivers. i would be curious if anyone has tried this swap yet. it may allow those of us in W-bodys to get a cold air intake, without relocating the battery. If there is the possiblitly of it fitting i may see if i can make it work.
-
-
you would have to chech hood clearance. cause if iirc they are pretty tall.sigpic
99 Grand Am GT
3400/3500 -Solid trans mount--TCE 65mm T-body---85mm LS2 maf---1 1/4' TCE intake spacers with 3400 upper--SLP Catback with flowmaster 80--TOG headers
Modded 3400 lifters with LT1 springs---Comp Cams 26986 Springs
1357 cam 227 233 .050 dur 515 515 lift 112 lsa
15.232@88.85mph on stock 3400---New time to come
-
Yeah, not going to work...
-Brad-
89 Mustang : Future 60V6 Power
sigpic
Follow the build -> http://www.3x00swap.com/index.php?page=mustang-blogComment
-
holy crap i didnt remember it sticking that far up.
you could always cut a hole in the hood. but it wouldnt look as cool as a supercharger sticking out.
on the other note does anyone know what the inside of that thing looks like. does it still have the runners.sigpic
99 Grand Am GT
3400/3500 -Solid trans mount--TCE 65mm T-body---85mm LS2 maf---1 1/4' TCE intake spacers with 3400 upper--SLP Catback with flowmaster 80--TOG headers
Modded 3400 lifters with LT1 springs---Comp Cams 26986 Springs
1357 cam 227 233 .050 dur 515 515 lift 112 lsa
15.232@88.85mph on stock 3400---New time to come
Comment
-
Cut a hole in the hood, and run some piping from the TB, to half of a stock air box aimed in front. Put in K&N drop in. Instant ram air!!! LOL
BTW that's gotta be the best plenum out there since it's like a 3500 but the TB neck doesn't take up any volume in side, and it opens right in dead center, from the center top!!!
IIRC it's like a 3500 inside.sigpic
New 2010 project (click image)
1994 3100 BERETTA. 200,000+ miles
16.0 1/4 mile when stock. Now ???
Original L82 Longblock with LA1, LX9, LX5 parts
Manifold-back 2.5" SS Mandrel Exhaust. Hardware is SS too.
Comment
-
it would be a good plenum to cut the top off and weld a plate on and mount the m90 on it. you dont have any other holes to block off.sigpic
99 Grand Am GT
3400/3500 -Solid trans mount--TCE 65mm T-body---85mm LS2 maf---1 1/4' TCE intake spacers with 3400 upper--SLP Catback with flowmaster 80--TOG headers
Modded 3400 lifters with LT1 springs---Comp Cams 26986 Springs
1357 cam 227 233 .050 dur 515 515 lift 112 lsa
15.232@88.85mph on stock 3400---New time to come
Comment
Comment