Tweet
Another carb option.
Although harder to find than an Edelbrock, Offenhauser made an intake manifold for the V6 iron heads. It has a much smaller plenium, making it demand a smaller fuel reservoir above the runners, and also has a lower profile.
As to the Holley List-8007, another couple of choices are to be had, but again are harder to find. A number of years ago Holley put a good deal of effort into designing a 390cfm 4bbl for a 2000cc Pinto. The result can be found in both 4160 (List -6299-1)and 4150 models (List-6299). They also made a 340cfm 4bbl (List-7410), and a 370cfm 4bbl (List-7411), but I've never seen either of these two in the flesh. Hope that adds to your choices.
Although harder to find than an Edelbrock, Offenhauser made an intake manifold for the V6 iron heads. It has a much smaller plenium, making it demand a smaller fuel reservoir above the runners, and also has a lower profile.
As to the Holley List-8007, another couple of choices are to be had, but again are harder to find. A number of years ago Holley put a good deal of effort into designing a 390cfm 4bbl for a 2000cc Pinto. The result can be found in both 4160 (List -6299-1)and 4150 models (List-6299). They also made a 340cfm 4bbl (List-7410), and a 370cfm 4bbl (List-7411), but I've never seen either of these two in the flesh. Hope that adds to your choices.
Comment