Tweet
I have a 89 z24 with a thrown rod. I bought a block I was told was a 3.1. It turns out to be a 3100. I allready have new 3.1 heads for it. Will it all bolt up?
-
-
Yes the upper end will work on the 3100.
IIRC, The front of block is a little different where the engine mount gets bolted on.1999 Grand Prix SE 3100
1997 Dodge Ram 1500 4X4 Ext cab. 5.2L
1977 Dodge Power Wagon, Short bed, Fuel injected 360, 4spd, Dana 60's, Little Red Express bed. -
What about pushrods with the roller cam. Oil pan? The 3100 has a windage tray.Comment
-
If the block's a 3100, find a 3100 top end. Sell the 3.1 heads. Trust me.-Tony | gtsdurango.net
'04 Dakota Quad Cab SLT 4x4 - the gas guzzling DD.
'90 Turbo Grand Prix STE - ehh.. I'm working on it.
'92 Gutless Supreme SL - RIP 5.2010
'90 Turbo Grand Prix - RIP 6.15.2005Comment
-
So it looks like I can't use the 2.8 oil pan. Will the 3100 oil pan fit ion my 89 z24?Comment
-
Fit on the engine? No. Fit inside of the engine bay? It should.Originally posted by joejicker-Brad-
89 Mustang : Future 60V6 Power
sigpic
Follow the build -> http://www.3x00swap.com/index.php?page=mustang-blogComment
-
fyi you'll need a new front engine bracket to bolt to the front engine mount.got zap-straps?
89 Z24
13.886 @ 96.16 mph
street trim - slicksComment
Comment