Announcement

Collapse
No announcement yet.

Need help identifying part/gasket

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need help identifying part/gasket

    So here is the run down.
    Vehicle: 1993 Chevy S10
    Engine: 2.8 V6

    I developed a coolant leak in the back of the motor (bad freeze/expansion plug). During the removal of the plugs I noticed a small oil drip from what I believe is the rear cam seal? not sure.. I removed the plate and the gasket came off sort of.. half is on the cover and half stayed on the motor. I need help identifying exactly what it is and if anyone knows the part number so I can order one.. I asked around searched parts catalogs but came up empty.. any ideas? Picture is below (click to enlarge).

    Click image for larger version

Name:	Capture.JPG
Views:	1
Size:	57.4 KB
ID:	381130

  • #2
    Camshaft housing gasket, Right on Rock auto.
    VICTOR REINZ Part # H36978
    $2.37
    Add Part

    Got Lope?
    3500 Build, Comp XFI Cam 218/230 .050 dur .570/.568 lift 113LSA
    Fully Balanced, Ported, 3 Angle Valve Job, 65mm TCE TB, S&S Headers.
    Stage-1 Raybestos/Alto 4t60e-HD, EP LSD, 3.69FDR
    12.61@105 Epping NH Oct 2015 Nitrous 100shot (melted plugs) 13.58@98.8 N/A 3200LBS

    Comment

    Working...
    X