Tweet
Hi all. I have been reading here for a couple of years, and I now need some help. I have a 3100 Gen II hybrid. LH0 heads and LG6 block. I didn't do the original build. Pulled the heads. Cleaned everything up and have re-installed the heads. Used Fel-Pro HS9471PT-1 headset, which I got with the car from the previous owner. BTW, this is installed in a 1967 MGB 
, but you guys are my #1 source for 60V6 information.
So I went to the local parts store for a LIM gasket set. They gave me Fel-Pro MS96046. This includes a one piece valley gasket. Is this the gasket set I want to use? I really don't want to do this again just because I used the wrong gasket set.
Thanks for your help. Any and all advise will be greatly appreciated.
Lee
, but you guys are my #1 source for 60V6 information. So I went to the local parts store for a LIM gasket set. They gave me Fel-Pro MS96046. This includes a one piece valley gasket. Is this the gasket set I want to use? I really don't want to do this again just because I used the wrong gasket set.
Thanks for your help. Any and all advise will be greatly appreciated.
Lee