I hear they will come out through the top with the exhaust all off. I have access to a lift but I've never pulled a motor from underneath. Would kinda like to try it though. Pros and cons?
Announcement
Collapse
No announcement yet.
Anyone ever pull a Renrzvous motor?
Collapse
X
-
Tags: None
-
I had to replace the head gaskets on my Rendezvous this summer. Even with the heads off, I think it would be a royal pain to get the engine out from the top. It is probably possible, but if I were to do it, I'd most likely look into taking it out the bottom.-Brad-
89 Mustang : Future 60V6 Power
sigpic
Follow the build -> http://www.3x00swap.com/index.php?page=mustang-blog
-
I got a 3400 out of a minivan out the top with just the UIM and alternator off (there was some scraping involved, but not where it was seen ). I haven't seen the engine bay on a Rendezvous, though.-60v6's 2nd Jon M.
91 Black Lumina Z34-5 speed
92 Black Lumina Z34 5 speed (getting there, slowly... follow the progress here)
94 Red Ford Ranger 2WD-5 speed
Originally posted by Jay LenoTires are cheap clutches...
Comment
-
Originally posted by bszopi View PostI had to replace the head gaskets on my Rendezvous this summer. Even with the heads off, I think it would be a royal pain to get the engine out from the top. It is probably possible, but if I were to do it, I'd most likely look into taking it out the bottom.
Its runs!!!>>>Aint No 60* Sound Like Mehttp://youtu.be/YKEmNwa141U
Comment
Comment