Ok, ill put the fuel back and deal with decel differently
Announcement
Collapse
No announcement yet.
3.4 Frankenbird Won't Start!
Collapse
X
-
also, I should add that when i didn't have my foot on the gas and was "gliding" so to speak the rpms didn't stay constant but surged up and down a bit. I thought this was odd and new.
93 Firebird 3.4
Pacesetter Headers, Flowmaster 80, Comp 1.6 RR,Cloyes 2x Set, P&P Heads & Intakes, Custom Cam, Holley FPR, Ram Air Intake, Posi Rear w/3.42's & Disk Brakes.
Cam and Heads by 60Inclusive.com
Comment
-
Originally posted by SappySE107 View PostOk, ill put the fuel back and deal with decel differently
I hope i don't sound like i'm complaining. I'm just telling you how it is
the car is running WAY better than i ever thought possible.
93 Firebird 3.4
Pacesetter Headers, Flowmaster 80, Comp 1.6 RR,Cloyes 2x Set, P&P Heads & Intakes, Custom Cam, Holley FPR, Ram Air Intake, Posi Rear w/3.42's & Disk Brakes.
Cam and Heads by 60Inclusive.com
Comment
-
No, i need this information to know what is going on. Can you imagine mailing chips back and forth to do this? F that. This is hard enough as it is but I can get it a lot better than it is now without having the car as long as I have the experience feedback to go with the datalog.Ben
60DegreeV6.com
WOT-Tech.com
Comment
-
aight cool. I'll keep feeding you info then. I just wish we could get the dang stalling issue taken care of. It's really annoying (and maybe even dangerous now that i think about it) to have the car stall out in the middle of the street while backing out of the driveway.
93 Firebird 3.4
Pacesetter Headers, Flowmaster 80, Comp 1.6 RR,Cloyes 2x Set, P&P Heads & Intakes, Custom Cam, Holley FPR, Ram Air Intake, Posi Rear w/3.42's & Disk Brakes.
Cam and Heads by 60Inclusive.com
Comment
-
Originally posted by SappySE107 View PostI might increase the idle speed to see if that helps for now. I really need some better datalogs to get some stabalized values. I need to map some values in my software as well because I am missing some that are important only for setups like this.
Either way, we might have to wait til I get the brakes done til i can get a "proper" log to take data from.
93 Firebird 3.4
Pacesetter Headers, Flowmaster 80, Comp 1.6 RR,Cloyes 2x Set, P&P Heads & Intakes, Custom Cam, Holley FPR, Ram Air Intake, Posi Rear w/3.42's & Disk Brakes.
Cam and Heads by 60Inclusive.com
Comment
-
Max... You keep mentioning your Brakes... what exactly are they doing or not doing? Spongy pedal... pulling? What? (besides the obvious problem of not stopping the car the way you want them to...) You are scaring the Hell out me about wanting to thrash out some higher speed runs to get the data logs caught up...without being able to stop the Red Rocket right...
Comment
-
lol don't worry Bob my friend. Before i start going for some nice and long logs which is what Ben requires to get the Red Rocket up and running to it's potential I'll be taking it over to a shop to get the brakes bled out fully. When I installed the new rear end i ran into some issues with the bleeder screws and now am forced to deal with the consequences.
I'll be gone for the weekend, but once i return I'll get the brakes taken care of to get you (and me) confident enough to continue to get Ben what he requires for the continuance of the tuning process.
93 Firebird 3.4
Pacesetter Headers, Flowmaster 80, Comp 1.6 RR,Cloyes 2x Set, P&P Heads & Intakes, Custom Cam, Holley FPR, Ram Air Intake, Posi Rear w/3.42's & Disk Brakes.
Cam and Heads by 60Inclusive.com
Comment
-
drove the bird to the shop without any issues.
hopefully this log will be good. I was at some sustained speeds for a little while which is what we wanted.
Let me know what you think of the log.Attached Files
93 Firebird 3.4
Pacesetter Headers, Flowmaster 80, Comp 1.6 RR,Cloyes 2x Set, P&P Heads & Intakes, Custom Cam, Holley FPR, Ram Air Intake, Posi Rear w/3.42's & Disk Brakes.
Cam and Heads by 60Inclusive.com
Comment
-
aw fiddlesticks.
once i get the brakes taken care of i will be able to "tap" the info we need.
93 Firebird 3.4
Pacesetter Headers, Flowmaster 80, Comp 1.6 RR,Cloyes 2x Set, P&P Heads & Intakes, Custom Cam, Holley FPR, Ram Air Intake, Posi Rear w/3.42's & Disk Brakes.
Cam and Heads by 60Inclusive.com
Comment
Comment