Tweet
96 lumina idle problem
I just swapped my throttle to a 56mm. Once installed and started it had a lopey idle until alittle warm and runs at 150-200 rpms higher. Can anyone help me out about to pull the rest of hair out.
-
-
your idle speed should drop as it gets warmer... the way i'm taking this is that it was working exactly opposite? -
Did you use your original sensors or the ones that came with the 56mm TB? I have seen people have issues before similar to this, and they went away when the original sensors were used.-Brad-
89 Mustang : Future 60V6 Power
sigpic
Follow the build -> http://www.3x00swap.com/index.php?page=mustang-blogComment
-
I used the original sensors. When i removed original sensors from the 52mm the IAC was very dirty and was cleaned. The car today when started had a lopey idle and once warmed it stopped and idled at about 900 rpm.Comment
-
I used the original sensors. When i removed original sensors from the 52mm the IAC was very dirty and was cleaned. The car today when started had a lopey idle and once warmed it stopped and idled at about 900 rpm. Do you think i need to adjust the idle screw. The parts from wot-tech and pretty sure i was set since i'm sure they done this a million times before. Before i installed i made sure the throttle was snapping back shut and i didn't really see no gaps.
Comment
-
I figured it out i had to put a hole in throttle plate like the old one had. Now car is idling way better and even drives better.Comment
Comment