So close yet so far away!!!

[Droptopz24]

Hey fellas, need some help! I've posted this on J-body.org but did not get a response.* I have a 93 cavalier Z24 with the 3.1L in it.* I recently had the motor rebuild with some "uppers" added to it.* I got the motor back in the car and about 98% of the wiring hooked back up.* There are two connections left and I have no idea where the corresponding hook-up is.* One is the connector that goes to the fuel rail and the other is what I believe to be the coolant temp. sensor.** Since I disconnected everything and took the motor out myself, I'm pretty baffled that I cant find the connections.* Please help!!!Brian
http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=241058392& albumID=1075531&imageID=11918511[/img][/url]

[Superdave]

I've posted this on J-body.org

well.. there is your problem.


www.V6Z24.com is the best 2nd gen site, the .org caters to the 3rd gen crowd.


http://www.v6z24.com/howto/locations that should help

[SuzukiGhostRider]

Photo is marked private. The CTS sensor is under the TB, towards the front of the car. You'll see it once you look under there. The Fuel Rail plug mounts to the back of the UIM typically so your plug is probably dangling by the firewall in the middle somewhere. It's a 4 wire plug on mine, should be on yours too. GL.

[Superdave]

92-94 jbodies don't have the 4 pin, they have a 6 pin with the CTS integrated into it.

[SuzukiGhostRider]

92-94 jbodies don't have the 4 pin, they have a 6 pin with the CTS integrated into it.

Oops, my bad, thx for the correction Dave. The CTS is located in the same spot then or no?

[Superdave]

Yep, same spot