Most power from a 3X00

[TurboGt]

Well after hearing about the most power out of a DOHC engine it made me start thinking about the push rod motors. I am mostly intrested in the 3400 and know that there are a few people running turbo on them, but any push rod 60* pushing some good number can be added.

If you can put up a dyno sheet with the power you put down, or a link to where you have it posted.

A small list of what is done to the engine and what it is in.

Here is one I know of:
It is turboz24's 3.1L
MAX power; 310 hp MAX torque; 289 ft-lbs

http://60degreev6.com/discussion/viewtopic.php?t=8612&highlight=dyno

I know he is pushing more boost but no dyno yet.

[TurboGt]

Here is a turbo'd 3400

Its is 89jyturbo

It put 328.8HP and 352.7Tq to the front wheels. The HP peaked at the very end of the pull, 5300rpm (it was still climbing a little, but you could tell it was about done). The torque peaked very flat, the peak was between 4300 and 4800rpm.

Here is his post:

http://www.v6z24.com/jbodyforum/viewtopic.php?t=78195&highlight=turbo

His web page:

http://khturbo.net/rmtz24/RMTZ24.html#PhaseIITurbo

Side note:
Here is turboz34's:

http://www.turboz24.com/

[TurboGt]

No one here has seen some high output forced induction puch rod motors????

Or did I find all of them????????????

[Doubt_Incarnate]

I want to see numbers for N/A.

[TurboGt]

Come on lets see some numbers

[sharkey]

lots of people have powerfull pushrod motors. many people just dont have access to a dyno to get the numbers.

i have a rather built up 2.8l ironhead. i currently need to do a bunch of tuning, but last year i managed a mid 15, this year heading for 14s. i personaly dont beleive in dyno numbers, they realy dont prove a lot. i perfer seeing what a car will do on a track, as thats all that matters in the real world.

[gboogie99]

i agree with sharkey on that.

[Syn]

dyno #'s are just braggin rights