Tweet
Don't know why it would not work with a stock cam. Larry
-
-
Stock cam is not flat at the end of the bearing journal, it has the hollow core tube sticking out of it. I'll take a picture tomorrow AM on why.
Got Lope?
3500 Build, Comp XFI Cam 218/230 .050 dur .570/.568 lift 113LSA
Fully Balanced, Ported, 3 Angle Valve Job, 65mm TCE TB, S&S Headers.
Stage-1 Raybestos/Alto 4t60e-HD, EP LSD, 3.69FDR
12.61@105 Epping NH Oct 2015 Nitrous 100shot (melted plugs) 13.58@98.8 N/A 3200LBSComment
-
I have one here, it will fit if you just knock the plug in the minimum amount to get it flush with the bore. If you need more clearance I guess you could take a hammer to the center before you drive it in. The Dorman plug is very thin to start with. LarryComment
Comment