can some one help me with diagnosing this problem?
Announcement
Collapse
No announcement yet.
oil leak only while running?
Collapse
X
-
Without much information to go on, that could be anywhere. It could be the distributor o-ring, a head gasket, a valve cover gasket, a LIM gasket, an oil pan gasket or a timing chain cover gasket...-60v6's 2nd Jon M.
91 Black Lumina Z34-5 speed
92 Black Lumina Z34 5 speed (getting there, slowly... follow the progress here)
94 Red Ford Ranger 2WD-5 speed
Originally posted by Jay LenoTires are cheap clutches...
-
Then that would either be the front valve cover or the front head gasket leaking. I would be more on the valve cover, but you really need to clean it really well if you have a hard time finding where it's leaking from so you can see where the trail starts.-60v6's 2nd Jon M.
91 Black Lumina Z34-5 speed
92 Black Lumina Z34 5 speed (getting there, slowly... follow the progress here)
94 Red Ford Ranger 2WD-5 speed
Originally posted by Jay LenoTires are cheap clutches...
Comment
-
Depending on the vehicle, it could also by the oil pressure sensor.-Brad-
89 Mustang : Future 60V6 Power
sigpic
Follow the build -> http://www.3x00swap.com/index.php?page=mustang-blog
Comment
-
Originally posted by zsharlow View Postyeah one of my friends also told me it could possibly be my rear main?
Typically that doesn't go out though... its more likely the valve cover, or Oil pressure sending unit as bszopi said.
Got Lope?
3500 Build, Comp XFI Cam 218/230 .050 dur .570/.568 lift 113LSA
Fully Balanced, Ported, 3 Angle Valve Job, 65mm TCE TB, S&S Headers.
Stage-1 Raybestos/Alto 4t60e-HD, EP LSD, 3.69FDR
12.61@105 Epping NH Oct 2015 Nitrous 100shot (melted plugs) 13.58@98.8 N/A 3200LBS
Comment
-
Originally posted by bszopi View PostDepending on the vehicle, it could also by the oil pressure sensor.-60v6's 2nd Jon M.
91 Black Lumina Z34-5 speed
92 Black Lumina Z34 5 speed (getting there, slowly... follow the progress here)
94 Red Ford Ranger 2WD-5 speed
Originally posted by Jay LenoTires are cheap clutches...
Comment
-
Sounds like oil pressure sensor should be right out the front near the oil filter, these usually leak pretty good when the engine is running, these car also leak fron the intake manifold gasket the vally as they call it the oil pressure senson is round and about 3 to 4 inches long depending on yr/ also ck you oil filter
Comment
-
Why did you ask if your not worried about it or even planning on fixing it?
Got Lope?
3500 Build, Comp XFI Cam 218/230 .050 dur .570/.568 lift 113LSA
Fully Balanced, Ported, 3 Angle Valve Job, 65mm TCE TB, S&S Headers.
Stage-1 Raybestos/Alto 4t60e-HD, EP LSD, 3.69FDR
12.61@105 Epping NH Oct 2015 Nitrous 100shot (melted plugs) 13.58@98.8 N/A 3200LBS
Comment
Comment