Announcement

Collapse
No announcement yet.

DIY Ceramic Coating

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    they say NOT to oven bake it, I'm not sure why, but I guess you just need to be carefull going in... yeah i know not easy.

    I'm using the supplied polishing liquid that came with the kit... Nothing too special I dont think.

    Now if my trans was closed up i would be able to bake this on but since I'm still shy parts I cant do that quite yet... I either have to wait for EP or leave early from work to go to the yard and buy another diff.
    Last edited by 3400-95-Modified; 05-15-2008, 02:29 PM.

    Got Lope?
    3500 Build, Comp XFI Cam 218/230 .050 dur .570/.568 lift 113LSA
    Fully Balanced, Ported, 3 Angle Valve Job, 65mm TCE TB, S&S Headers.
    Stage-1 Raybestos/Alto 4t60e-HD, EP LSD, 3.69FDR
    12.61@105 Epping NH Oct 2015 Nitrous 100shot (melted plugs) 13.58@98.8 N/A 3200LBS

    Comment


    • #17
      This is what I got it to buffing more at work... Also was able to touch up the small spots that chipped a little due to water being under it, I just used a tooth pick, dipped it in and rubbed it on the part, worked like a charm.

      Now I just hope it sticks...




      Got Lope?
      3500 Build, Comp XFI Cam 218/230 .050 dur .570/.568 lift 113LSA
      Fully Balanced, Ported, 3 Angle Valve Job, 65mm TCE TB, S&S Headers.
      Stage-1 Raybestos/Alto 4t60e-HD, EP LSD, 3.69FDR
      12.61@105 Epping NH Oct 2015 Nitrous 100shot (melted plugs) 13.58@98.8 N/A 3200LBS

      Comment


      • #18
        Did you de-grease them with brake cleaner and rub them down first or just dish soap and water?
        sigpic New 2010 project (click image)
        1994 3100 BERETTA. 200,000+ miles
        16.0 1/4 mile when stock. Now ???
        Original L82 Longblock
        with LA1, LX9, LX5 parts
        Manifold-back 2.5" SS Mandrel Exhaust. Hardware is SS too.

        Comment


        • #19
          Black beauty blasted them to strip all the paint off, then used Por-15 metal ready and then wiped them down with acetone before coating.... as instructed.

          Got Lope?
          3500 Build, Comp XFI Cam 218/230 .050 dur .570/.568 lift 113LSA
          Fully Balanced, Ported, 3 Angle Valve Job, 65mm TCE TB, S&S Headers.
          Stage-1 Raybestos/Alto 4t60e-HD, EP LSD, 3.69FDR
          12.61@105 Epping NH Oct 2015 Nitrous 100shot (melted plugs) 13.58@98.8 N/A 3200LBS

          Comment


          • #20
            let us know obviously if holds up after engine start up
            Eric

            Comment


            • #21
              I should know the answer of that one by tomorrow night if my EP LSD shows up during the day.

              Got Lope?
              3500 Build, Comp XFI Cam 218/230 .050 dur .570/.568 lift 113LSA
              Fully Balanced, Ported, 3 Angle Valve Job, 65mm TCE TB, S&S Headers.
              Stage-1 Raybestos/Alto 4t60e-HD, EP LSD, 3.69FDR
              12.61@105 Epping NH Oct 2015 Nitrous 100shot (melted plugs) 13.58@98.8 N/A 3200LBS

              Comment


              • #22
                And?

                Comment


                • #23
                  Ok, well an update, so far so good, BUT I think prep is really the biggest thing here... I might have missed the smallest spot with cleaner right on one of the welds by the collector... so far that is the only spot it has flaked, and its like a tiny spot... I also chipped the front with the fan going in... I was rather pissed about that one, but that I should be able to touch up with a q-tip and the paint, and then bake that back on... the Q-Tip works good because after that you polish it so you sort of take down any unevenness... I'm gonna try to see ifthey polish up some more now but honestly I dont care if they stay gray like the color they turned... as long as they dont rust!

                  I'll get pics later today.

                  Got Lope?
                  3500 Build, Comp XFI Cam 218/230 .050 dur .570/.568 lift 113LSA
                  Fully Balanced, Ported, 3 Angle Valve Job, 65mm TCE TB, S&S Headers.
                  Stage-1 Raybestos/Alto 4t60e-HD, EP LSD, 3.69FDR
                  12.61@105 Epping NH Oct 2015 Nitrous 100shot (melted plugs) 13.58@98.8 N/A 3200LBS

                  Comment


                  • #24
                    Here are some pics...

                    Only part thats flaking right now.




                    And the chips I did... ###### FAN! LOL



                    Overall shots.





                    Got Lope?
                    3500 Build, Comp XFI Cam 218/230 .050 dur .570/.568 lift 113LSA
                    Fully Balanced, Ported, 3 Angle Valve Job, 65mm TCE TB, S&S Headers.
                    Stage-1 Raybestos/Alto 4t60e-HD, EP LSD, 3.69FDR
                    12.61@105 Epping NH Oct 2015 Nitrous 100shot (melted plugs) 13.58@98.8 N/A 3200LBS

                    Comment


                    • #25
                      Still looks nice though
                      -60v6's 2nd Jon M.
                      91 Black Lumina Z34-5 speed
                      92 Black Lumina Z34 5 speed (getting there, slowly... follow the progress here)
                      94 Red Ford Ranger 2WD-5 speed
                      Originally posted by Jay Leno
                      Tires are cheap clutches...

                      Comment

                      Working...
                      X