More polished valve covers...

[SappySE107]

hmm, battery acid and a battery charger. That doesn't sound too complicated

[SE'sarecool2]

Wow! That's what I want my 3500 UIM to look like also.

[neo71665]

hmm, battery acid and a battery charger. That doesn't sound too complicated

Its not, I've done it before. Heres a link to a how to

http://www.warpig.com/paintball/technical/anodize.shtml

There are better write ups but thats the one I can find easy cause warpig is in my favs.

[neo71665]

Also with a lil more reading I can tell you that you don't want to anno these in colors if they are cast. It turns out really bad and splotchy light/dark spots. I've never seen or tried clear so I can't tell you if it'll work or not. All steel, rubber, or anything not aluminum MUST be taken off the part or it will be destroyed and steel/aluminum in an anno bath are not pretty. One lil spring in a paintball marker handle cost me $100.

[IsaacHayes]

Yeah the steel splash plates in the back of these will need to be removed. I forget how they are secured.

[ForcedFirebird]

Also with a lil more reading I can tell you that you don't want to anno these in colors if they are cast. It turns out really bad and splotchy light/dark spots. I've never seen or tried clear so I can't tell you if it'll work or not. All steel, rubber, or anything not aluminum MUST be taken off the part or it will be destroyed and steel/aluminum in an anno bath are not pretty. One lil spring in a paintball marker handle cost me $100.

Exactly. These covers are cast, and even powdercoating may come out inconsistant depending on prep.

Yeah the steel splash plates in the back of these will need to be removed. I forget how they are secured.

4 torx screws :P