05 3400 cam position wiring.

[3400-95-Modified]

I just need the pinouts on the cam position sensor for a 04-05 3400 its the plug that is right on the sensor, the newer style one.

Pins are as follows, A-Brown/white, B-Black, C-Red/white

I'm trying to splice it into my OBDII harness so I can use the newer sensor and wire routing my 96 OBDII plug/harness that I'm trying to splice it into has A-Red(Power), B-Brown/white(Signal), C-Red/Black(Ground)

I just need to know the A, B, and C function on the 04-05 plug

[gectek]

from an 02 but should be the same

[3400-95-Modified]

They changed in 04 to a sensor that does not have a tail on it, the plug is right on the sensor at the block.

Thats a pinout of the wiring that I know... I need one for the 04+ sensor, the wire color to pins are different...

Pins are as follows, A-Brown/white, B-Black, C-Red/white

I guess I can assume that brown/white is signal, red white is power and black would be ground, but then again GM has done some weird things before.