quad 4 tranny questions

[sharkey]

i know its not 60 degree, but its related.

anyone here know much about quad 4s??? im looking for a 92-94 5 speed. did the LO quad 4 come with the getrag or isuzu??? from some other reading ive done, all 92-94 quad 4 came with a 3.94fdr, but there was a 3.94 fdr in the isuzu. i know the quad ohc (the sohc version) had an isuzu, but im not sure on the LO version. i know all the HO are getrags.

im just wondering if i need to find a car with a HO to get the tranny from. quad 4;s are kinda scarce around my area, so i may have to do some calling around to find out who has what, and i need to know what im talking about.

[Doubt_Incarnate]

what about the late model LD9 (2.4) from the new z24's? maybe that has the gearing you need

[Doubt_Incarnate]

not exactly what your looking for, here is a ton of gear ratios

http://www.fastfieros.com/NEW_manual_transmission_ratios.htm

[sharkey]

the 2.4l uses an isuzu. they are not a very strong tranny. they will hold some horsepower, but dont try to throw v6 torque at em.

[FastGT31]

i may be wrong, but arent the only quads that came with the 3.94fdr are the ones with the w41 option?

[sharkey]

a couple people have pointed that out, but according to the getrag 282 section on this site and the quad 4 forums, the 92-94 quad 4 getrag has a 3.94 fdr, and the rpo code for that tranny is 3xtx. the w41 tranny has an rpo code 4xtx

[MidnightriderZ24]

what are your goals is what u need to keep in mind. a 92-94 q4 ho tranny will be a shorter 4th only. it will limit u in the 1/4 for future plans. i chose a 90 q4 ho tranny. it has a slightly shorter 2nd, and the desired 4th, and 5th, that will help u if u plan to be boosted (like i am since i will be hitting 5th in the 1/4....i believe that its a 3.61 ratio and is a little bit more common than a 3.94fdr. whatever u do stay away from a 91' tranny