Tweet
Hello,
Just wondering whats involved in removing the valve body in a 4T60E?
Thanks,
Dan
Just wondering whats involved in removing the valve body in a 4T60E?
Thanks,
Dan
-
-
make trans side cover accessable, either by dropping that side of the driveline down or removing it.
1 Remove side cover
2 Remove wiring harness from VB
3 Remove pump housing
4 Remove valve body
If you've never gone into a 4t60e yet, I will suggest buying at ATSG book from ebay, it will help a lot telling you which bolts to remove and what to torque them to going back in. Its a little too much to explain in a post.
Got Lope?
3500 Build, Comp XFI Cam 218/230 .050 dur .570/.568 lift 113LSA
Fully Balanced, Ported, 3 Angle Valve Job, 65mm TCE TB, S&S Headers.
Stage-1 Raybestos/Alto 4t60e-HD, EP LSD, 3.69FDR
12.61@105 Epping NH Oct 2015 Nitrous 100shot (melted plugs) 13.58@98.8 N/A 3200LBS -
That and some Trans assym grease. Helps keep those dam balls in place.88 Beretta GTU turbo . 90 Black ASC/McLaren TGP, awaiting 4t80. 2003 Grand AM se 3400/4t45 daily grind.Comment
-
good call, i forgot about that.
Got Lope?
3500 Build, Comp XFI Cam 218/230 .050 dur .570/.568 lift 113LSA
Fully Balanced, Ported, 3 Angle Valve Job, 65mm TCE TB, S&S Headers.
Stage-1 Raybestos/Alto 4t60e-HD, EP LSD, 3.69FDR
12.61@105 Epping NH Oct 2015 Nitrous 100shot (melted plugs) 13.58@98.8 N/A 3200LBSComment
Comment