ok the transmission in my 97 grand am se with a 3100 is having problems I know it is on its way out my question is that I have a transmission from a 96 lumina with only 1K on the rebulid are these the same I bleave they are but want to make sure befor I take every thing apart
Announcement
Collapse
No announcement yet.
96 transmission in 97
Collapse
X
-
both 4t60e's? I'm assuming?
if so tag on the 97 should be 7BSW 2.93 final drive, 37/33 chain gears 3.29 diff 1630 converter.
a 96 Lumina is a 3.1 equipped w-body, tag on trans should say 6AFW, this will net you a 3.33 diff, 35/35 chain setup and a 2095 converter.
Only issue I see here is your shift points being messed up since the gear ratio changed... I had problems with my car when I switched to OBDII but when it was a 95 ecm I went from the same gear ratio to the 3.33 and had no issues... I have since modified my bin with DHP to correct for the gear change.
Get both Trans ID's and I can give you more solid info, this is guessing by body style. Tag is on the passenger side tail shaft, near the diff.
Got Lope?
3500 Build, Comp XFI Cam 218/230 .050 dur .570/.568 lift 113LSA
Fully Balanced, Ported, 3 Angle Valve Job, 65mm TCE TB, S&S Headers.
Stage-1 Raybestos/Alto 4t60e-HD, EP LSD, 3.69FDR
12.61@105 Epping NH Oct 2015 Nitrous 100shot (melted plugs) 13.58@98.8 N/A 3200LBS
Comment