any poly control arm bushings out there???

[dohcfiend]

title pretty much says it all application is gen 1 w-body.

[OldSkoolGP]

I'd be down, but what I really need is customer bult control arms that move the ball joint mount up. You rig those up and they'll sell. Anyone who's lowered needs them to correct suspension geometry.

[dohcfiend]

hmm that explains the tire wear then. all this time i thought it was the 400 lb springs and the triple digit curve speeds . pm me your research and and what exactly needs to be done and i will see what i can come up with. as my gtp is pretty much slammed too.

p.s. i take it there are no poly control arm bushings out there?

[geoffinbc]

I have poly bushings. But I would NEVER use them again. They are the noisiest junk I have ever used. I would only use them again if they were greasable.

As for moving the ball joint up. That may be easier than you think. Check out Howe Racing http://www.speedwaymotors.com/p/4791...ll-Joints.html They make increased height joints and may be able to help you. The other way to do it is to make a plate to fit under the joint and raise the whole thing up.

[dohcfiend]

what are the part numbers for your poly control arm bushings??????? plz!?

[HayesPerformance]

It is a MUST to gease ANY poly-bushings. EVEN engine mounts or they are noisy!

[OldSkoolGP]

Well I looked at their list, they don't seem to make anything that would work on a Gen 1 suspension, unless you were implying they could make a custom ball joint?

[AWeb80]

It is a MUST to gease ANY poly-bushings. EVEN engine mounts or they are noisy!

what about graphite impregnated poly?

btw, the speedwaymotors warehouse is in my hometown....10 minutes from me.

I know a guy who is a graphics designer there.

[dohcfiend]

sweet, holla at them and see what they can do. while you are at it ask about engine mounts too .

[AWeb80]

sweet, holla at them and see what they can do. while you are at it ask about engine mounts too .

can you clarify exactly what you want....pics and such....just wanna have all the info you want before I look like a dunce and walk in there and not know what i'm talking about.

[pwmin]

ooh, yeah, engine mounts

http://www.partsamerica.com/ProductList.aspx?PartType=27&PTSet=A&SearchFor=Mount%2c+Engine

zzp makes poly trans mounts for the 65's. 60's and 65's have the same part numbers, but read the description in the link

http://www.zzperformance.com/grand_prix/products1.php?id=427

[dohcfiend]

can you clarify exactly what you want....pics and such....just wanna have all the info you want before I look like a dunce and walk in there and not know what i'm talking about.

poly front control arm bushing is what i need. if you feel the need, get a set from an auto parts store and i'll re-imburse you.

[geoffinbc]

what are the part numbers for your poly control arm bushings??????? plz!?

I have an S-10. Not quite the same. But check out energy suspension. My buddy got Energy Suspension bushings from them for his Cavalier.