Announcement

Collapse
No announcement yet.

will the 3.1 engine in a 98 olds achieva come out through the top?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • will the 3.1 engine in a 98 olds achieva come out through the top?

    im getting ready to take out my old worn out 3.1 will the motor come out through the top? can i just unbolt the motor from the tranny and leave it in place and just lift out the motor?
    thanks

  • #2




    Yep. I've done it at least twice...
    -Brad-
    89 Mustang : Future 60V6 Power
    sigpic
    Follow the build -> http://www.3x00swap.com/index.php?page=mustang-blog

    Comment


    • #3
      Yes, you can but make sure to get the engine good and far away from the trans before you lift it up significantly so you don't damage the torque convertor by pulling up on it by the center nub that sticks into the back of the crank in the center of the flywheel.

      Comment


      • #4
        Also make sure you support the passenger-side of the tranny from underneath, before you pull the engine out. My friend has a '97 Skylark, same platform as the Achieva, and he got it out the top easily. You may have to undo the hood supports if the car has it, and prop the hood higher.
        Brian

        '95 Cutlass Supreme- "The Rig"
        3400 SFI V6, 4T60e
        Comp Cam grind, LS6 valve springs, OBD2 swap, Tuned
        2.5" DP/ 2.5" dual exh/ Magnaflow Cat/ crap mufflers/ 3500 Intake manifold/ 65mm TB
        TGP steering Rack/ 34mm Sway Bar/Vert STB/ KYB GR2's

        '08 Chevy Trailblazer SWB 1LT "Smart Package"- LH6 5.3L V8/4L60e, A4WD

        Comment


        • #5
          thanks everybody for the great info!

          Comment

          Working...
          X