Announcement

Collapse
No announcement yet.

A forbidden swap, I know...

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • A forbidden swap, I know...

    Ok, so my inlaws have a 1991 Buick Regal 3.1 with a blown engine and tranny. They don't want to spend much at all to fix it up. So I was looking around their land yesterday and found a 1991 Olds 88, with a good 3800 and tranny. Since the Regals were available with the 3.8, how simple of a swap could/should it be? Anyone have any schematics? I have access to them if I want to pay, but figured I'd try the free way first. Anyway, I know I'll have to change the PROM to a 3.8 Regal one, and possibly a few wiring/pin changes... but anyone else know any complications I might come across?
    -Brad-
    89 Mustang : Future 60V6 Power
    sigpic
    Follow the build -> http://www.3x00swap.com/index.php?page=mustang-blog

  • #2
    mout locations might be a problem. let me see there will be a difference in the airboxes so a fenderwell cai or an air intake tube will solve that. coilpack location is different (maybe i don't know where the 3.1 coilpacks are). that may or may not be a problem. i am pretty sure your exhaust will not just bolt up either.

    this is just stuff off of the top of my head. i am not a tech by trade(just a 1/2 ass tech by necessity) if it helps u great but most likely u know this stuff already
    The Official Rotating Mass Nazi

    Comment


    • #3
      Originally posted by dohcfiend
      i am not a tech by trade(just a 1/2 ass tech by necessity)
      I think this covers pretty much 99% of us here. My guess would be take the whole engine side harness, subframe, and exhaust (or just down pipe) from the donor car. Like I said though, it's just a guess.
      -60v6's 2nd Jon M.
      91 Black Lumina Z34-5 speed
      92 Black Lumina Z34 5 speed (getting there, slowly... follow the progress here)
      94 Red Ford Ranger 2WD-5 speed
      Originally posted by Jay Leno
      Tires are cheap clutches...

      Comment


      • #4
        This is a 60ºV6 site, not a 90ºV6 site.

        Fuck off.
        I modify stuff

        Comment


        • #5
          Yeah, go to clubgp.com, they can help you with all your 3.8 needs.
          Ben
          60DegreeV6.com
          WOT-Tech.com

          Comment


          • #6
            You guys suck...
            -Brad-
            89 Mustang : Future 60V6 Power
            sigpic
            Follow the build -> http://www.3x00swap.com/index.php?page=mustang-blog

            Comment


            • #7
              You keep that attitude up and im gonna lock this thread

              The good thing about the Regal is that it came w/ the 3800 in 91. Everything you need, you can get from GM. Unfortunately I only have fiche for the GrandPrix, which wont show all the parts you're gonna need. The wiring harness should plug right in as long as there are no special gadgets the 88 got that the regal didnt. Most i see you having to change:

              Mounts
              heater hoses (may route diff)
              If the fuse boxes and battery are in diff locations on the 88, then that stuff will have to move.

              most everything you should be able to pull from the 88
              I modify stuff

              Comment


              • #8
                Can you get a pic of the passenger mirror. I need one and will pay you for it.
                To Many Mods To List, Check It Out At
                Joe\'s 95 GA GT
                3100 Best ET : 15.389 @ 90.48Mph
                3400 Best ET : TBD

                My Cardomain Site

                Comment


                • #9
                  LMAO of all people to want to do a 3.8 swap-i would have never figured!

                  Comment


                  • #10
                    what no 3800 swap for the beretta oh yeah
                    sigpic
                    99 Grand Am GT
                    3400/3500 -Solid trans mount--TCE 65mm T-body---85mm LS2 maf---1 1/4' TCE intake spacers with 3400 upper--SLP Catback with flowmaster 80--TOG headers
                    Modded 3400 lifters with LT1 springs---Comp Cams 26986 Springs
                    1357 cam 227 233 .050 dur
                    515 515 lift 112 lsa
                    15.232@88.85mph on stock 3400---New time to come


                    Comment


                    • #11
                      Brad, you wanting 2 cars to burn to the ground?
                      Links:
                      WOT-Tech.com
                      FaceBook
                      Instagram

                      Comment


                      • #12
                        TRAITOR. Why put an iron head boat anchor in any car?

                        Comment


                        • #13
                          and yes-i do realize i am a total bastard for upping a thread that is 5 years old, but bszopi wanting to swap in a 3.8, THATS worth bringing up :P

                          Comment


                          • #14
                            Thread of the year?
                            Corey's 95 GP - Engine/Trans installed
                            02 GTP - 90* > Failboat
                            www.blackbombshell95.com

                            Comment


                            • #15
                              Originally posted by no_doz View Post
                              and yes-i do realize i am a total bastard for upping a thread that is 5 years old, but bszopi wanting to swap in a 3.8, THATS worth bringing up :P

                              ^^^=FAIL
                              Links:
                              WOT-Tech.com
                              FaceBook
                              Instagram

                              Comment

                              Working...
                              X