95 3.4 DOHC to 96 3.4 DOHC wiring

[700HP3.4]

Ok i have done the swap. Came up with one problem. There is a 10 pin connection and I dont know where it goes. It is located on left side of eng near the MAF sensor. the wire extension is around 6" long. And this connection is on the OBD2 engine wire harness.. This connection is about 1/2 to 3/4" wide and is about a inch and half long. If you need the color code of wires i can get that but not till next week. Plz help if u can

Steve

[700HP3.4]

Ok color code of wires at this connecter one side is brown, white, green, white, green the other side is blue, brown, gray/black, black, gray

Any help would help me.

STeve