Announcement

Collapse
No announcement yet.

HI and HELP

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • HI and HELP

    I'm pretty new to this 60* stuff. so here goes.Im swapping a 3100 from a 2001 malibu in to my Suzuki basesd buggy.I'm not sure if I'm if i'm using a standard or auto tranny. So here are my questions
    if using a standard,are they internal or exteral balance...do i use a 3.1 fywheel?
    Will the 2.8 700r4 hold up?
    And i am pulling the wiring from the car,,,anything i should watch for?

    Thanks for the help

  • #2
    internally balanced. I would use OBD1 but you can go obd2 and program out all the error codes and then tune it with hptuners.

    I would imagine a 700R4 would be fine for your setup, especially for the weight.
    Ben
    60DegreeV6.com
    WOT-Tech.com

    Comment


    • #3
      This tunning stuff is new to..what could i get the obd1 stuff from?
      thanks

      Comment


      • #4
        You will want a waterproof version, so any 88-93 grand prix, lumina, regal, or cutlass would be good.
        Ben
        60DegreeV6.com
        WOT-Tech.com

        Comment

        Working...
        X