Announcement

Collapse
No announcement yet.

chevy to olds v-6 swap

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • chevy to olds v-6 swap

    hey guys maybe some one can help on here,, i have a 97 monte with a 3.1 that is about on its last go around.I can get a 3.8 97 model olds motor and trains for nothing its a very low mile motor around 32 thousand still runs strong, car was wrecked but not in the front,I know that it would take some re-wiring to get it to run but as far as i can see all the connections are close to the same ,just a matter of relocating them.I was just wondering if the motor mounts and trans mount would be the same , far as i can tell there located in the same spots even on the sub frame..... any ideas.... will take advise...any and all is welcome

  • #2
    It is a completely different engine. It wont be a direct swap. If the olds is the same body design, meaning a W body like yours, then get the whole car as a donor and swap anything that is different. Keep in mind this still does not entail a pain free swap. For more info visit a 3800 dedicated site
    1993 EXT. CAB, 3.4L V6 TBI, 5spd manual. Sonoma
    1990 4Door, 3.2L V6 TBI, 5spd manual. 4X4. Trooper
    Because... I am, CANADIAN

    Comment


    • #3
      -Brad-
      89 Mustang : Future 60V6 Power
      sigpic
      Follow the build -> http://www.3x00swap.com/index.php?page=mustang-blog

      Comment


      • #4
        this is a very difficult swap for anyone that hasn't played around with newer fuel injection. the bell housing pattern is the only thing in common with those two engines. besides the 3.8, 3800 are boat anchors. 60degreev6's rule.
        Last edited by jtwmechanic; 04-02-2009, 02:02 PM.

        Comment

        Working...
        X