please measure your block & help me!! :)

[no_doz]

without accessories-bare block-from front to back (just engine) can someone please measure their v6 block & post the measurement (im curious to see how large these are and how close together they are)-the measurement im looking for would be from the accessory side of the block to the other side where youd bolt on the flywheel. thank you guys SO much for any help, i love coming to 60*v6 for this stuff because this is what you guys rock ass at.

[no_doz]

yes i am absolutely hammered

[Superdave]

yes i am absolutely hammered

as am I.. which is why i went out to my 21F garage barefoot and checked...


17 1/4"

[no_doz]

thanks bro-what engine did ya measure?

[SappySE107]

17 1/8" 3400 block bare on my stand. 1/8" isn't a big difference but I measured mine since its a heated garage and the engine is next to my porting bench. Oh and Im sober and awake:P

[Superdave]

I measured a 3500 but it could have been 1/8" off since there is a garbage bag tied around it.

Close enough :P

[bszopi]

17.14567" (slightly more than 1/8") And yes, I am accurate. :P



Add up the dimensions (in mm) and divide by 25.4.

[no_doz]

damn, now THATS accurate!!