Announcement

Collapse
No announcement yet.

first time, need help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • first time, need help

    what is the easiest way to remove the engine from my car? 1997 malibu LS 3100sfi. have a bad motor and need to replace it.

  • #2
    Pull it out the top, seperate from the tranny.
    -Brad-
    89 Mustang : Future 60V6 Power
    sigpic
    Follow the build -> http://www.3x00swap.com/index.php?page=mustang-blog

    Comment


    • #3
      Depending on how the transmission is mounted in the car when you split it from the engine, you can use a 2x4 across the engine bay front to back and a ratchet strap to hold up the trans while the engine is out.
      I modify stuff

      Comment


      • #4
        I always just used an extra jack stand to support the tranny while the engine was out.
        -Brad-
        89 Mustang : Future 60V6 Power
        sigpic
        Follow the build -> http://www.3x00swap.com/index.php?page=mustang-blog

        Comment


        • #5
          thanks

          thanks guys. i have pulled engines out of older rwd cars but never a fwd i had seen some people pull the whole engine cradle from the bottom and really did not want to do that. so this will save me some time

          Comment


          • #6
            Originally posted by bszopi View Post
            I always just used an extra jack stand to support the tranny while the engine was out.
            If you have the room and dont need to move the car, that will work to. I always have to wheel the car out while I work on the engine, so the trans has to be supported from above.
            I modify stuff

            Comment

            Working...
            X