Announcement

Collapse
No announcement yet.

Need dhp 3500 05 malibu bin

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need dhp 3500 05 malibu bin

    I'm in need of a tunable dhp bin file for a 3500 Malibu 3.5 that my buddy swapped into his 00 grand am gt. The osid on his ecu is 9389348 which I can't load on dhp or tiny tuner. If anyone knows a way around this or has a tunable bin I would be very happy. Thanks

  • #2
    you will probably have to go to HPTuners to tune that... I don't think there was ever a tunable 3500 bin or support for those ECU's

    Why did he swap ECU's in his 00 Grand AM though? Is this a 3.5 VVT motor or just a 3500? If it's just the regular 3500 he wasted a lot of time swapping ecu's since the 00 Grand Am one would have run it just fine.

    Got Lope?
    3500 Build, Comp XFI Cam 218/230 .050 dur .570/.568 lift 113LSA
    Fully Balanced, Ported, 3 Angle Valve Job, 65mm TCE TB, S&S Headers.
    Stage-1 Raybestos/Alto 4t60e-HD, EP LSD, 3.69FDR
    12.61@105 Epping NH Oct 2015 Nitrous 100shot (melted plugs) 13.58@98.8 N/A 3200LBS

    Comment


    • #3
      It is just a normal 3500 no vvt. I don't know why he didn't use the grand am ecu, I didn't know him at that point. Just trying to get it running right now. I will see if he wants to switch back to a grand am ecu and then I know I can tune it. Thanks for the info

      Comment


      • #4
        The 3500 ECU cannot be tuned because it's not supported by anything
        '89 Firebird, 3500 Turbo, T56, 9-bolt/4.11
        '86 Fiero, 3500, 4-speed

        Comment


        • #5
          Yeah damn... he should have researched tuning support before swapping ECU... A lot of work to back himself into a corner...

          HP tuner support
          97-03 Malibu 3.1, 3.4
          97-05 Malibu 2.2, 2.4
          13-14 Malibu 2.0
          06-12 Malibu 3.5, 3.6, 3.9 (3.5 in 07+ only)

          so no 3500 support, Only 3500 VVT since that was 07+

          I guess he HAS to swap back now... LOL

          Got Lope?
          3500 Build, Comp XFI Cam 218/230 .050 dur .570/.568 lift 113LSA
          Fully Balanced, Ported, 3 Angle Valve Job, 65mm TCE TB, S&S Headers.
          Stage-1 Raybestos/Alto 4t60e-HD, EP LSD, 3.69FDR
          12.61@105 Epping NH Oct 2015 Nitrous 100shot (melted plugs) 13.58@98.8 N/A 3200LBS

          Comment

          Working...
          X