Announcement

Collapse
No announcement yet.

dhp and osid 9352742 -

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • dhp and osid 9352742 -

    is osid 9352742 supported under DHP anyway? if so, mind giving this n00b the heads up on how? :P

  • #2
    Originally posted by hookdonspeed View Post
    is osid 9352742 supported under DHP anyway? if so, mind giving this n00b the heads up on how? :P
    OSID list: https://spreadsheets.google.com/pub?...n1_K034oyJoMUQ

    It isn't on the list, but I've had some supported that were not there. What is that OSID for? I've also had it where only the latest calibration was supported so you would either have to find the latest stock OSID and flash it with the DHP or have the dealer flash it if you can't find it on the internet. You can check the OSID level here:

    Jesse M.

    3x 1990 Turbo Grand Prix
    1987 Monte Carlo SS Aerocoupe

    Comment


    • #3
      98 venture, ordered a base tune from sinister performance for my 3500 swap, i was hoping to be able ot flash myself, looks like ima have to mailout my ecu anyway :/

      Comment


      • #4
        If you don't mind send me the VIN by PM and I will see what I can find.
        I am wondering if the file from a 98 olds silhouette would work http://60degreev6.com/forum/local_li...id=3&linkid=82
        2000 Grand Am GT
        2011 Chevy Impala

        "The world's best cam combined with a poor set of heads will produce an engine that's a dog. But bolt on a set of great heads even with a poor cam, and that engine will still make great power." ~John Lingenfelter

        Comment


        • #5
          Quite possible, I currently use a 1997 Venture ECU and Bin file to run my 96 Beretta... Didn't have to touch or change one wire.

          Got Lope?
          3500 Build, Comp XFI Cam 218/230 .050 dur .570/.568 lift 113LSA
          Fully Balanced, Ported, 3 Angle Valve Job, 65mm TCE TB, S&S Headers.
          Stage-1 Raybestos/Alto 4t60e-HD, EP LSD, 3.69FDR
          12.61@105 Epping NH Oct 2015 Nitrous 100shot (melted plugs) 13.58@98.8 N/A 3200LBS

          Comment


          • #6
            Originally posted by 3400-95-Modified View Post
            Quite possible, I currently use a 1997 Venture ECU and Bin file to run my 96 Beretta... Didn't have to touch or change one wire.
            I use a 97 Lumina PCM to operate my 96 GP, and I too didn't need to change a single wire. But I did that for HPTuner compatibility. Seems like a quick fix for all 96'ers who want HPT tuning.

            If DHP can extract the file and burn the file, then Tiny Tuners can fix just about anything you need to change. I've set trans controllers to manual, 2-bar map, etc.

            btw, I tried flashing a 98 file and it bricked my first 97 Lumina PCM. I don't think 97 and 98 firmware is compatible.
            1996 Grand Prix | 3100v6 L82 | T04E-50 Turbo | Getrag 282 w/ EP LSD | SPEC-3 Clutch

            Comment


            • #7
              96 was supported in DHP for me, but the 97 file had more tables mapped out and a larger file all together. If I want to go to HPT I would need a 97 Monte, or Lumina setup I guess.

              TT is limited too, at least to the point of how many tables they have mapped. I know there are tons more that I want in my 97 file that he hasn't been able to add yet.

              Got Lope?
              3500 Build, Comp XFI Cam 218/230 .050 dur .570/.568 lift 113LSA
              Fully Balanced, Ported, 3 Angle Valve Job, 65mm TCE TB, S&S Headers.
              Stage-1 Raybestos/Alto 4t60e-HD, EP LSD, 3.69FDR
              12.61@105 Epping NH Oct 2015 Nitrous 100shot (melted plugs) 13.58@98.8 N/A 3200LBS

              Comment

              Working...
              X